Identificador: 1693
Abierta
.jpg)
Descripción
PARTE: 2CK-PH48-2 - MESA DE TIJERA - 4' x 8'
Is strongly built with a massive steel frame that provides maximum durability and is capable of lifting up to 4400 lbs. It is hydraulically operated and controlled by a foot pedal for operator convenience. The PH48-2 is adjustable in height from 14” up to 71”. It is ideal for staging material for feeding into various woodworking machines like sanders, glue spreaders, panel saws, ripsaws, and more.
- 4400 lifting capacity
- 4’x8’ deck size
- 14” to 71” lifting capacity
- Robust welded steel frame
- Powerful 2HP hydraulic motor for raising & lowering the scissor lift
- Convenient foot pedal operation
|
Deck Size |
47” x 94” (1200 x 2400 mm) |
|
Lowered Height |
14” (350 mm) |
|
Raised Height |
71” (1800 mm) |
|
Travel |
58” (1470 mm) |
|
Motor |
2 HP |
|
Capacity |
4400 lbs (2000 kgs) |
|
Electrics |
115 Volt – Single phase |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CORTADORA DE METAL ESTILO GANG
CORTADORA DE METAL ESTILO GANG PARTE: 2GM-PS-4816GT48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phasewith NC programmable cut to length, 5” touch screenISO 9001 certifiedAmerican design and Taiwan quality machineSlit and cut to length in one unitNC programmable cutting length, 100 job memory featureSingle cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.Auto cycle mode-shearing will auto cycle the programmed cut lengt...
AMXmachinery1
PARTE: 2CK-FL-08 - SISTEMA FINGER JOINT - AUTOMATICO
PARTE: 2CK-FL-08 - SISTEMA FINGER JOINT - AUTOMATICOAUTO INFEED
TABLE
Length
900mm (35.4”)
Width
600mm (23.6”)
Infeed
Table½ HP (3Ph) x 2
AUTO FINGER SHAPER – LEFT
Table Size
600mm (23.6”)
Length
150~900mm (5.9” ~ 35.4”)
Width
20~60mm (0.78” ~ 2.36”)
Thickness
20~160mm (0.78” ~ 6.3...
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 15 PULGADAS
PARTE: 2CK-C14RSIs a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C14RS can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 15′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel a...
AMXmachinery1
SIERRA MULTIPLE - 3 SIERRAS MOVIBLES
PARTE: 2CK-MRS450MFEATURESThe Main Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stabilityHD Precision Straight Line Feeding caterpillar Chain typeFeed Chain with easily Replaceable bolt in Cast Steel or Urethane Pads – optionalFully Programmable Position sets (10 programs of 10 sets each) or Infinitely variable foot pedal position set.User friendly Touch Screen control (free standing operators control console) is integrated with a 32 bit micro process or...