Identificador: 2593
Abierta
ID de articulo : # 2593 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 14'' X 40'' PARTE: 2GM-1440BGF-1PH
Our engine lathe is suitable for machining in metalworking machine shops, tool rooms, and repair shops. Ideal for making threads and turning metal parts like, shafts, spindles, sleeves, discs, weapon components, and many more parts. Our lathes are robust, reliable, easy to use, convenient to repair, precise, quiet, and have no vibration.
- Lifetime Tech Support by phone and video
- Full Geared-head precision Metal Lathe with foot brake
- Quick-change gearbox with fast and easy threading set up
- 3 HP heavy duty main motor runs on 220V Single-Phase power
- Spindle bore 1.5”
- Spindle Nose D1-4 Camlock
- Heavy Duty guideway width 7 1/2”
- 8 spindle speeds ranging from 70-2,000 RPM
- 56 kinds of inch threads
- 44 kinds of metric threads
- Spindle is balanced, hardened and precision ground
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Comes equipped with:
- SINO (DRO) Digital Readout - Installed
- Taper Attachment - Installed
- 6” 3-Jaw Chuck with reversible jaws
- 8” 4-Jaw Chuck with reversible jaws
- 10” Face Plate
- 3.75” Large Steady Rest
- 2” Follow Rest
- Foot Brake
- Coolant System
- Metal Stand with 2 Cabinets
- Halogen work lamp
- 4-Way Tool Post
- Full Length Splash Guard
- 2 – Dead Centers
- 1 – Reducing Sleeve
- 1 – Thread Chasing Dial
- 1 – Tool Box with maintenance tools
L A T H E C A P A C I T Y | |
Max. Swing Over Bed | 14” |
Max. length of workpiece | 40” |
Max. length of cutting | 34” |
Max. Swing Over Cross Slide | 8.25” |
Center Height | 7” |
Distance between centers | 40” |
Bed Width | 7.5” |
Bed Length |
|
S P I N D L E | |
Spindle Nose | D1-4 Camlock |
Spindle Bore | 1.5” |
Spindle Taper Nose | MT5 (Morse Taper #5) |
Spindle Taper Sleeve | MT3 (Morse Taper #3) |
Range of Spindle Speeds | 70-2,000 RPM |
Low Spindle Speeds | 70/115/190/300 RPM |
High Spindle Speeds | 460/755/1255/2000 RPM |
Steps of Spindle Speed | 8 steps |
F E E D | |
Range of Longitudinal Feeds | 0.00168” - 0.11750”/rev. IPR, 24 kinds |
Range of Cross feeds | 0.00046” - 0.03231” /rev. IPR, 24 kinds |
T H R E A D I N G | |
Imperial Threads QTY. / Speed | 56 / 4-112 TPI |
Metric Threads QTY. / Speed | 44 / 0.1-7.0 mm |
Diametral Pitch threads QTY. / Speed | 32 / 16-112 DP |
Module threads | 34 / 0.1 – 1.75 mm |
T A I L S T O C K | |
Tailstock Quill Diameter | 1.5” |
Tailstock Quill Taper | MT3 (Morse Taper #3) |
Tailstock Quill Travel |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA DE CANTOS
PARTE: 2LA-360 - LIJADORA DE CANTOSThe key to successful profile sanding is a combination of machine versatility, use of the correct abrasive medium, plus a little patience and understanding. The results are a remarkable increase in consistency, quality, and productivity.wheel tilts forward or backwardremovable fencequickly make fine adjustments
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...
-500x500.png)
AMXmachinery1
TORNO 26 X 80''
TORNO 26 X 80'' PARTE: 2GM-268026” x 80”, 4-1/8” bore, 10HPISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP4-Way Rapid Traverse16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by h...
AMXmachinery1
AFILADORA PARA SIERRA DE VAIVEN - BANDA RECTA
PARTE: 2TA-TG-225B - AFILADORA PARA SIERRA DE VAIVEN - BANDA RECTAFEATURESA Peripheral Equipment for Frame SawDesigned to Maximize Blade Service Life While Minimizing Blade Consumption.The wet grinding feature assures extremely fine finish on teeth surfaces and greatly extends cutting period of saw blade.Very precise grinding module.Exact guiding of saw blades guarantees a minimum satellite loss.Grinding amount adjustment is accurately indicated by dial gauges.Variable grinding speed is con...