Identificador: 2599
Abierta
ID de articulo : # 2599 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2GM-05316E - DOBLADORA DE METAL 5' X 3/16''
Capacity: Mild Steel Stainless Steel soft aluminum min. thickness |
5'1" x 3/16" 5'1" x 10Ga 5'1" x 5/16" 26GA |
|
|
| Roll Dia. | 5 7/8" |
| Min. Bending Dia. Inch | 7 1/2" |
| Pre-bend inch | 0.12" |
| Rolls Speed ft/min | 20 |
| Rolls Opening | 1/2" |
| Main Motor | 4HP 3PH 220V or 440V |
| Weight | 3,550 lbs. |
| Overal Dimensions | 96" x 32" x 52" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS - 7.5 HP - CICLON
PARTE: 2EX-DC-275 - COLECTOR DE POLVOS - 7.5 HP - CICLONComes in single and three phase models with 2 1-micron filter bags. It features a 117 square foot filter area with 24 cubic feet of storage capacity measuring 140 inches tall by 120 inches wide by 50 inches deep. The single-phase dust collector is powered by a 7.5 horsepower Baldor motor has 38 amps at 220 volts while the three-phase dust collector is powered by a 7.5 horsepower TEFC motor has 20 amps at 220 volts. Drums not included. Ma...
AMXmachinery1
TORNO 32 x 120''
PARTE: 2GM-GML-32120 - TORNO 32 x 120'' Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision groundSpindle is support...
AMXmachinery1
CONECTOR EN Y
PARTE: 2EX-DA-SW0404 - CONECTOR EN YOffers wye branches for splitting a branch or trunk line into two separate branches with trunks available in 4 to 16 inch diameters and branches available in 3 to 10 inch diameters.
AMXmachinery1
ROUTER DE PEDESTAL - 7.5 HP
PARTE: 2CK-SR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a s...