Identificador: 2665
Abierta
ID de articulo : # 2665 se ha agregado a su lista de deseos.
PARTE: 12624 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 37” ANCHO - POWERMATIC
AMXmachinery
Descripción
PARTE: 12624 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 37” ANCHO - POWERMATIC
USADA – EXCELENTES CONDICIONES
15hp Motor
220v, 3ph
Combination Head
37 x 60
Variable Speed
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2UK-PW35-F5-E - RECUBRIDORA DE MOLDURAS
PARTE: 2UK-PW35-F5-E - RECUBRIDORA DE MOLDURAS- Six meters, long steel construction bedframe, composed of 19 groups of synchronized transport wheels of 15mm width driven by a frequency inverter controlled motor (1.5 kW) with speed variation from 10 up to 47 m/min. Through an helicoil screw spindles gear transmission. STANDARD EQUIPMENT- Quick adjustable guides for profile Access ( EASY FEEDING) - Top cleaning brush, 0.37 kW motor power, rotati...
AMXmachinery
LOTE DE TRANSPORTADORES DE RODILLOS Y BASES
PARTE # 11773 - LOTE DE TRANSPORTADORES DE RODILLOS Y BASESEN MUY BUENAS CONDICIONESMEDIDAS CADA UNO:Largo: 10 pies (3 metros)Ancho: 24”Diámetro rodillos: 1.875”Altura del marco: 3.5”TRANSPORTADORES EN EXISTENCIA: 170BASES EN EXISTENCIA: 120
AMXmachinery
PARTE: 12172 – TORNO COPIADOR - LOCATELLI BIG ARRIET
PARTE: 12172 – TORNO COPIADOR - LOCATELLI BIG ARRIET
USADO
– BUENAS CONDICIONESFully operationally
over
$9,000 in steady rests and tooling
max.
capacity 4" dia. x 6" length
Sequence
as follows;
roughing
knife
steady
rest
traveling
roughing knife
second
roughing pattern knife
finishing
pattern knife
parting
knife
Also
....if needed
end
boring bit or formed bit
second
end boring bit or formed knife with side sliding movementLocatelli Dime...
AMXmachinery
ESPIGADORA DOBLE
PARTE # 12005 – ESPIGADORA DOBLE MESA – PADE T45Limpiada y revisadaMaximum Tenon Length: 100mmMaximum Tenon Thickness: 30mmMaximum Tenon Depth: 50mmVertical Table Adjustment: 100mmTraversal Table Adjustment: 50mmTables TiltPneumatic Hold-DownsCutterhead Motor: 3 HPRevolution Motor: 1 HPMechanical Digital Readouts for Tenon AdjustmentsCurrently Wired for 460v, 3ph (Please Ask About Available Voltage Change to 230v, 3ph)