Identificador: 2849
Abierta
ID de articulo : # 2849 se ha agregado a su lista de deseos.
LIJADORA - CALIBRADORA - BANDA ANCHA – 2 LIJAS - 1 CEPILLO - 53” ANCHO
AMXmachinery
Descripción
PARTE: 12684 - LIJADORA - CALIBRADORA - BANDA ANCHA – 2 LIJAS - 1 CEPILLO - 53” ANCHO
SCMI
Usada - Buenas condiciones
1st Head Planer
2nd Head Drum
3rd Head Combi Head
Mfg. 2012
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...
AMXmachinery
PARTE: 2CA-RM150 - BASTONERA – CAPACIDAD 1” - 5” DIAMETRO
PARTE: 2CA-RM150 - BASTONERA -
CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board...
AMXmachinery
PARTE: 2TA-TG-5000 – AFILADORA DE CUCHILLAS RECTAS - 26" LARGO
PARTE: 2TA-TG-5000 – AFILADORA DE CUCHILLAS RECTAS - 26" LARGONueva con garantiaFeatures:Heavy-duty straight knife grinder, rapid for grinding processing and saving time.Economical model and efficiency for processing high powerful of any straight knife grinding such as Planner & Jointer Knife, Peeling Knife, Super Surface Knife, and Veneer Cutting Knife.Automatic grinding wheel movement forward and backward, label saver.Heavy cast iron body.High precision and durability.SPECIFICATIONS2TA-TG-30...