Identificador: 2838
Abierta
ID de articulo : # 2838 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 2MK-CPD/5.S - COLECTOR DE POLVOS - 5HP
Is ideal for cabinet shops with high production. With a 200 liters (53 Gallons) tank capacity, you can attach carbon steel or bag, both tanks are easy to be replaced. It has 5 entries with 100 mm (4 inches) and a 5 hp motor. The entry system can be changed according to the needs of its owner.
| Technical Information | |
|---|---|
| Motor specs | 5 HP 3 phases 220V 20 A |
| Air Flow Capacity | 2760 CFM |
| Bag volume | 400 L (14.13 ft³) |
| Number of air inlet: | 5 (4in) |
| Filtration | 2.5 micron |
| Bag size | 25" x 35" | 580mm x 900mm |
| Weight | 242.5 Lbs. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS - 25 HP - CICLON
PARTE: 2EX-DCY-1425 - COLECTOR DE POLVOS - 25 HP - CICLONFeatures a powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions. This series requires no bagging because all waste dumps from the rotary air lock, and there is no need to power down the unit while cleaning up waste. Is a 3-phase outdoor cyclone dust collector equipped with 25 horsepower and 10500 CFM. Electronic controls must be protected from weather. Magnetic star...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 3/16''
DOBLADORA DE METAL 4' X 3/16'' PARTE: 2GM-04316EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is power...
-500x500.png)
AMXmachinery1
ADITAMENTO PARA SIERRA ESCUADRADORA
PARTE: 12750 - ADITAMENTO PARA SIERRA ESCUADRADORAMain components appear complete, may need some other hardware, nuts bolts, spacers etc.Maximum cut off width depends on table saw, 57" For Motel 66 and 54" for Models 68,72,74See last photo for specs.
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS - AIRE CALIENTE
PARTE: 2SS-EZ 60HA - ENCHAPADORA DE CANTOS - AIRE CALIENTEOur hot air edgebander applies your preferred choice of preglued edgebanding. Reduce the amount of panels discarded due to unsatisfactory edge banding installation. It features electronic variable speed control, digital temperature control, electromagnetic end cutters, an accutrim edge trim system and more. The innovative design of this American-Made machine makes it easy to use and provides a very dependable edgebanding solution. This ma...