Identificador: 2839
Abierta
ID de articulo : # 2839 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 2MK-CPD/3.C - COLECTOR DE POLVOS - 3HP
Was developed for cabinet shops with high production. With air flow rate of 2,760 ft³/min, the CPD/3 collects dust of up to 3 machines simultaneously.
| Technical Information | |
|---|---|
| Motor Spec | 3 HP 1 phase 220 V 15 A |
| Air Flow Capacity | 2,760 CFM |
| Fan Diameter | 12" | 305mm |
| Bag Capacity | 15 ft3 | 0.43 m3 |
| Number of air Inlet | 3 |
| Inlet size | Main: 6" | 150mm - Spliter: 4"/100mm |
| Filtration | 1 micron |
| Sound Rating | 89 dB |
| Weight | 128 Lbs | 58 kg |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CONECTOR DE RAMA
PARTE: 2EX-DA-LT0404 - CONECTOR DE RAMAOffers lateral tee branches for branching a main trunk line with trunks available in 4 to 18 inch diameters and branches available in 4-16 inch diameters.
-500x500.png)
AMXmachinery1
ROUTER CNC
PARTE: 4RI-PRO-LINE-CNC - ROUTER CNCDesigned for highly sensitive components.Drilling from 6 sides: top, right, left, back, bottom, front• Horizontal magazine with belts• Capacity up to 14 pcs/min• Set-up help using light beam• One-man operatedExtra• Side movement• 45 degree drilling• Small millings• CNC milling and drilling end-processing• Can be integrated in a line of machines• Waste ConveyerLength:250 – 2200 mmHeight:10 – 40 mmWidth:25 – 300 mm
-500x500.jpg)
AMXmachinery1
ENCHAPADORA DE CANTOS - AUTOMATICA
PARTE:
2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICANueva con GarantiaIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX350M can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end tri...
AMXmachinery1
EXTRACTOR DE POLVOS - 10 HP
PARTE: 2EX-DB-100 - EXTRACTOR DE POLVOS - 10 HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specif...