Identificador: 2843
Abierta
ID de articulo : # 2843 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 2MK-CBC.T - ENCHAPADORA DE CANTOS
- Machine frame made out of steel, single block base with superior stability.
- Anodized aluminum outfeed fence.
- 1 Phase 220V
- Table Dimension 2000 mm x 265 mm
- Tape Thicness 0.4 mm to 3 mm
- Panel Thicness 12mm / 45mm
- Automatic Panel Feed System
- Dual Pressure rollers
- Melamine, PVC, ABS, PP, Veneer and Laminate
- Pre-Heated Infeed Fence
- Individually adjustable Flush Trimming
- Digital Temperature Control
- Pre-heated infeed fence
- Front and back end Trimming
- Top and Bottom Flush Trimming
- Dual Buffing Unit
- Extendable Panel Support Rail
- Push button Control panel
| Automatic Feeding speed | 16ft/MIN | 5M/MIN |
| Panel thickness Min/Max | 31/64" - 1 3/4" | 12 - 45 MM |
| Edgebanding thickness | 0.0157" - 0.118" | 0.4 - 3 MM |
| Glue Pot Capacity | 2 Lbs | 1 kg |
| Max Edgebanding Height | 2" | 50 MM |
| Minimum panel width | 4 3/4" | 120 MM |
| Minimum panel length | 9 7/16" | 240 MM |
| Extendable Panel Support Rail Length | 78 21/32" | 1998 MM |
| Extension table Max Width | 12" | 310 MM |
| Size of Dust Collector Ports (2) | 4" | 100 MM |
| Minimum Dust Collection Requirements | 700 CFM | 20M/MIN |
| Air Pressure Requirement | 6 SCFM @ 100 PSI | 7 kg/cm2 |
| Edgebanding coil Support Diameter | 31 1/2" | 820 MM |
| Recommend Glue Temperature Range | 356°F - 410°F | 180°C - 210°C |
| Glue Type | Pellet - Granulated Hot-Melt | Pellet - Granulated Hot-Melt |
| Max. machine dimensions (LxWxH) | 112"x 63"x 51" | 2844 x 1600 x 1295 MM |
| Machine weight | 849 LBS | 385 KGS |
| Shipping dimensions (LxWxH) | 86" x 36" x 57" | 2184 x 914 x 1448 MM |
| Shipping weight | 1025 Lbs | 465 Kgs |
| Motor/Electrical | Specs |
|---|---|
| Electrical Requirement | 1 Phase 220V 30 Amps 60 Hz |
| Conveyer Motor | 3/4HP(0.55KW) |
| Flush Trimmer Motor | 3/4HP(0.55KW) |
| End Trimmer Motor | 1/4HP(0.18KW) |
| Glue Spindle Motor | 1/3HP(0.25KW) |
| Top Buffing Motor | 1/4HP(0.18KW) |
| Bottom Buffing Motor | 1/4HP(0.18KW) |
| Sound Rating | 80 dB |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CORTADORA DE METAL ESTILO GANG
CORTADORA DE METAL ESTILO GANG PARTE: 2GM-PS-4816GT48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phasewith NC programmable cut to length, 5” touch screenISO 9001 certifiedAmerican design and Taiwan quality machineSlit and cut to length in one unitNC programmable cutting length, 100 job memory featureSingle cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.Auto cycle mode-shearing will auto cycle the programmed cut lengt...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX340Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who does not require pre-milling.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick ch...
-500x500.jpg)
AMXmachinery1
TALADRO MULTIPLE - MAGGI SISTEMA 35
PARTE: 2JG-MAG-SYSTEM35 - TALADRO MULTIPLE - MAGGI SISTEMA 35Provides a 35 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angleAccurate positioning of the boring unit to the table with digital readout0 to 3.25" adjustable drilling depth with patented spiral setting device(4) patented quick release material clamps with auto-setting to firmly ho...
-500x500.png)
AMXmachinery1
ALIMENTADOR CON VELOCIDAD VARIABLE
ALIMENTADOR CON VELOCIDAD VARIABLE PARTE: 2CK-DC30Is a safe and powerful feeding unit for shapers, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The DC brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job. The universal stand allows for quick positional adjustment from a...