Identificador: 2896
Abierta
ID de articulo : # 2896 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2RI-R76 - TALADRO LINEAL CNC - 76 HUSILLOS
Description:
A closet system drill part of the panel master series. Is a CNC single row system drill with programmable drill row location and boring depth. Is used for drilling full length closet panels in a single process. The drill row ball screws and linear rails provide for precision drill row location. The servo driven ball screw table feed control allows for precision drill depth control and through feed boring.
The multiple spindles and CNC control allow you to drill precise and consistent holes in a single process, significantly increasing your productivity.
Standard Features:
- 76-Spindle Gear Driven Drill Head
- (39) Right Hand, (36) Left Hand
- Touch Screen HMI
- Twin Ball Screw Drill Row Positioning
- Triple Precision Table Guide Rails
- Twin Ball Screw Boring Stroke Control
- Programmable Boring Depth, Servo Driven
- 108" Back Fence with (4) Adjustable Material Stops
- Right and Left Hand Work Stations
- (4) Pneumatic Material Clamps
- (4) Spring Operated Material Clamps
- Center Beam Mounted Cycle Start Button
- (2) Emergency Stop Buttons
- Tooling Not Included
Technical Data and Specifications:
- Drive Motors: 3 HP
- Spindle Centers: 32mm
- Collet Size: 10mm
- Throat Capacity: 24"
- First to Last Spindle: 2,400mm (94.488")
- Maximum Material Thickness: 1.25"
- Electrical: 230V, 3Ø, 60Hz, 60A or 460V, 3Ø, 60Hz, 30A
- Air: 2 CFM at 80 – 100 PSI
- Work height: 36″
- Footprint: 56″ x 110″
- Table Area: 30″ x 108″
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 12"
PARTE: 2CK-303S - SIERRA MULTIPLE - 1 SIERRA - 12"Is a straight line ripsaw that is the ideal ripping upgrade for those looking to prepare material for a moulder or for producing face frame material. Automatically feeds the material for consistent rip results. The cast iron feed chain runs on double V guide rails and holds the material firmly for precision straight cutting. A powerful 10 HP motor with maximum 12” blade provides a cutting depth up to 3.35”. A micro adjustable infeed fen...
AMXmachinery1
LIJADORA DE CEPILLOS - 36" ANCHO PARA MADERA Y METAL
PARTE: 2EX-PS-371 - LIJADORA DE CEPILLOS - 36" ANCHO PARA MADERA Y METALDetails: Used for sanding raw wood, brush finishing metal and scaling metal. This profile sander has a variable speed sanding head and conveyor. The brush backed sanding strips sand the raw wood. The nylon impregnated bristles help with fine raw wood sanding and act as a sanding sealer. There is also a wire brush head available for scaling metal and brush finishing metal.Specifications: Horsepower: 1HP or 5HPVoltage: 230VP...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
-500x500.png)
AMXmachinery1
GUILLOTINA MECANICA - 12 PIES LARGO X 14 GA
PARTE: 2GM-HS-1214M - GUILLOTINA
MECANICA - 12 PIES LARGO X 14 GA ISO 9001 certifiedTaiwan machinesQuick Change Blade Gap AdjustmentCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and strokeBall transfer plates on worktable for easy loading workpieceWell balanced and sturdy all steel machine frameGerman made Hydraulic logic system centrally located and quietHydraulic hold-downs with anti-mar neopren...