Identificador: 943
Abierta
ID de articulo : # 943 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HP
PARTE # 3GO-GT-610B - CEPILLO 2 CARAS – CAPACIDAD 24” ANCHO – MOTOR 15, 10, 2, ½ HP
PARTE # 3GO-GT-610A - CEPILLO 2 CARAS – CAPACIDAD 24" ANCHO – MOTOR 20, 15, 3, ½ HP
ESPECIFICACIONES
PARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HP
Motor: 10hp,7.5hp,2hp,1/2hp
Maximum width of cut: 405MM
Minimum thickness of cut: 8MM
Cutter-head speed: 4000RPM
Maximum thickness of cut: 200MM
Minimum length of cut: 250MM
Dust hood outlet diameter : 5" x 2
Machine Dimensions (L*W*H): 2300*980*1800MM-PALLET
Net Weight/Gross Weight : 1800/1900 kgs
Variable feed speed: 7-24m/min-inverter
Standard cutterhead (HSS knife size:405*3*30mm) Q'TY on each cutterhead :4 PCS
PARTE # 3GO-GT-610B - CEPILLO 2 CARAS – CAPACIDAD 24” ANCHO – MOTOR 15, 10, 2, ½ HP
Motor: 15hp,10hp,2hp,1/2hp
Maximum width of cut: 610MM
Minimum thickness of cut: 8MM
Cutter-head speed: 4000RPM
Maximum thickness of cut: 200MM
Minimum length of cut: 250MM
Dust hood outlet diameter : 5" x 2
Machine Dimensions (L*W*H): 2300*1160*1800MM-PALLET
Net Weight/Gross Weight : 2200/2350 kgs
Variable feed speed: 7-24m/min-inverter
Standard cutterhead (HSS knife size:610*3*30mm) Q'TY on each cutterhead :4 PCS
PARTE # 3GO-GT-610A - CEPILLO 2 CARAS – CAPACIDAD 24" ANCHO – MOTOR 20, 15, 3, ½ HP
Motor: 20hp,15hp,3hp,1/2hp
Maximum width of cut: 610MM
Minimum thickness of cut: 10MM
Cutter-head speed: 4000RPM
Maximum thickness of cut: 200MM
Minimum length of cut: 310MM
Dust hood outlet diameter : 6" x 2
Machine Dimensions (L*W*H): 2700*1160*1800MM-PALLET
Net Weight/Gross Weight : 2880/3000 kgs
Variable feed speed: 7-24m/min-inverter
Standard cutterhead (HSS knife size:610*6*38mm) Q'TY on each cutterhead :4 PCS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
LIJADORA DE DISCO Y BANDA
PARTE:
2AR-97181 – LIJADORA DE DISCO Y BANDANUEVA EN SU CAJA ORIGINALPowerful
3.5 amp motorCast
aluminum table tilts to 60° for use with belt or disc6
in. disc for fast stock removalMiter
gauge for sanding angles on workpieceAdjustable
belt sands inside and outside curvesReinforced steel motor housingAC
Volts: 120Accessories
Included: Miter gauge, sanding belt and sanding discAmperage
(amps): 3.5Belt
width”: 4 in.Diameter
disk: 6 in.Horsepower
(hp): 3/4Speed
(max): 1819 RPM (di...
-500x500.jpg)
AMXmachinery
PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
PARTE:
4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
Nueva con garantía
Demo
model with about 30 hours on it
Specifications
-
Comes with digital readouts on the vertical and horizontal axis, readout in
decimal inches or mm
-
Processing sheets both horizontally and vertically
-
Cutting height is 2100mm
-
Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”
-
Weight 2400 lbs
-
Thickness of cut i...
AMXmachinery
PARTE: 12592 - TRITURADORA – BALEMASTER - MODELO 1440 - 30 HP – 63”
PARTE: 12592 - TRITURADORA – BALEMASTER - MODELO 1440 - 30 HP – 63”USADO - BUENAS CONDICIONESMotor Leeson 30 HP, 3/60/208-230/460 Volt, 1785 RPM
AMXmachinery
SIERRA INGLETEADORA – DOBLE – CTD
PARTE: 12105 – SIERRA INGLETEADORA – DOBLE – CTDUsada – Buenas condiciones230/460V, 60 Cy, 3 PhaseMotor: 3 HP, 3450 RPM.09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per MinuteSaw Heads Swivel From 90 Degrees-45 Degrees Toward Each-Other with Degree Markings and Stops at 90 Degrees-45 Degrees8' Centers, Traveling Right Hand Carriage On Rack and PinionSaw Arms-Pivot Brackets are Cast Iron10" Blade-2" (51MM) x 4-7/8" (124MM)12" Blade-2.5" (64MM) x 5-3/8 (136 MM)Weight: 2000 LBS...