Identificador: 3121
Abierta
ID de articulo : # 3121 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 4ST-TR 450 MATRIX - SIERRA OPTIMIZADORA - CORTES RECTOS
AUTOMATIC CROSSCUT SAW WITH ELECTRONIC PUSH-FEED
MATRIX, A STROMAB PHILOSOPHY
Is a crosscut saw with electronically pusher-controlled with complete optimisation and defection of wood.
An optimal solution for all 90° up-cutting requirements, it can work with either single bars or packs.
The push-feed is built with a rack and pinion feed system and brushless motor to ensure
uncompromised positioning and maximum cutting accuracy.
The software architecture relies on an electronic programmer with a high-resolution 12’ touch-screen monitor,
simple and intuitive graphic interface with Linux operating system.
The cutting lists can be created directly on the software on board the machine or imported via connection
to Ethernet or USB network ports.
The software allows automatic optimisation of the cutting list to reduce waste and optimise the machining process
according to 6 criteria: maximum length, minimum waste, sequence, table sequence, volume and priority.
A photocell allows automatic measurement of the workpiece to be cut (OPTI function).
A second photocell detects fluorescent marks for the elimination of knots and defects (OPTI PLUS function).
Possibility of integrating label and ink-jet printers to the cutting line.
Automatic loading and unloading systems can be implemented on request.
Clear choices for complex solutions.
Technical specifications Cutting unit
Blade diameter
- 450 mm
Blade rotation speed
- 2900 rpm
Blade motor power
- kW 4 (HP 5,5)
Blade driving
- Pneumatic Automatic
Working table height
- 850 mm
Working table inclination
- 8°
Minimum crosscutting section
- 20 x 10 mm
Max operating pressure
- 6-8 bar
Extraction outlets
- 2 x Ø100 mm
Net weight
- 1300 kg
Technical specifications Push-feed
Loading Capacity
- from 2000 upto 6000 mm
Maximum speed
- 90 mt / min
Max positioning speed
- 90 mt / min
Max return speed
- 90 mt / min
Positioning accuracy
- +/- 0,4 mm
Max boards weight
- 80 kg
Cutting execution cycle
- 4 seconds
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TRANSPORTADOR DE RETORNO
PARTE: 2DO-BT3 - TRANSPORTADOR DE RETORNO1 Edge bander + 1 Return Conveyor = 1 fully productive operator, a
streamlined workflow, less handling damage, less rejects… Unlike their human counterpart, an automated
system needs no hiring, no training, does not take off sick and works extended
hours without receiving extra money. This is true for all Return Conveyors
installed on shaper/sanders, single end tenoners, planers and wide belt
sanders.Operating Principle: Its receiving rollers ar...
-500x500.png)
AMXmachinery1
PRENSA FRIA - 4" X 8"
PARTE: 2LO-PT-48CP - PRENSA FRIA - 4" X 8"Heavy gauge sheet material frame.Large hydraulic piston.Easy operation.Specification:SPECIFICATIONSPT-48CPPT-510CPPT-HP48-3PT-HP48-5Table Size96" x 49"121" x 61"98" x 51" x 1.5"98" x 51" x 1.5"Max. Working Heigth39"39"4"4"Max. Pressure Capacity60 Tons60 Tons100 Tons100 TonsPress Moving Speed5 FPM5 FPM5 FPM5 FPMHydraulic Pump Motor7.5 HP7.5 HP10 HP10 HPHeating Power~~48 KW54 KWDistance Between Layers~~4"4"Total of Layers~~35Machine Size119" x 49" x 116"1...
AMXmachinery1
ESPIGADORA DOBLE
PARTE: 3RE- D60M - ESPIGADORA DOBLE Professional solution for volume producing two ends profile of panel furniture, door, solid wood floor, solid wood composite floor, PVC floor, MBF floor, wood-plastic composite with max thickness 85mm.Characteristic1. Each spindle can rotate , convenient to achieve angle-truncate , tenon, groove and etc2. Can hoggers on cut-off saw that can discharge waste material more helpfully3. Adopted widen by high precision linear orbit, machine can run in precision ...
AMXmachinery1
LIJADORA DE BANDA ANCHA - ARRIBA Y ABAJO
PARTE: 2CK-SU/SBIs designed for in-line or stand-alone operations. Suitable for double-sided processing solid wood or sealer sanding applications is built to exacting standards to sand multiple surfaces generally in one pass to achieve outstanding results with maximum efficiency. Is available with multiple configurations with 1-4 sanding units and widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (drum/platen), or wire brush h...