Identificador: 3126
Abierta
ID de articulo : # 3126 se ha agregado a su lista de deseos.
Descripción
PARTE: 4ST-TR 450 - SIERRA TRONZADORA
CUT OFF SAWS WITH ASCENDING BLADE
CLASSIC TOOLS FOR SAWING
Is a cut off saw that was born out to meet the crosscutting needs of small and large industries.
Thanks to a pneumatic saw unit drive with bimanual hand-saving control, a motor power of 5,5 kW
and a 450 mm diameter blade it can cut up to 95 mm thick and 330 mm wide.
Technical specifications Cutting unit
Blade diameter
- 450 mm
Blade rotation speed
- 3000 rpm
Blade motor power
- kW 4 (HP 5,5)
Blade driving
- Two-handed starting system
Working table height
- 852 mm
Workpiece loading
- Side
Max operating pressure
- 6-8 bar
Extraction outlets
- 2 x Ø100 mm
Net weight
- 240 kg
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 12GA
PARTE: 2GM-0412E - DOBLADORA DE METAL 4' X 12GA This machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is ...
AMXmachinery1
TALADRO - BISAGRADORA - 1HP
PARTE: 2MK-LBM.13 - TALADRO - BISAGRADORA - 1HPLoaded with features such as the lubricated aluminum head, heat treated steel gears, 1 HP motor and stainless-steel spindles. These machines offer carpenters and woodworkers the opportunity to work with the most innovative bench top boring machine currently on the market!Technical InformationMotor1HP 110V 1 Phase 10A 60 HZPrewired110 V, Single – Phase – 10 A / 5 ATable Size31"x 15 1/2"Spindle Speed3.450 RPMFence Stops2Expandable Fence GuideMax 8...
-500x500.png)
AMXmachinery1
SIERRA CINTA 34"
PARTE: 12742 - SIERRA CINTA 34"Tested and works as it should.No brake
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE; 2PI-HPMT - ESPIGADORA HORIZONTAL Has a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.Elimination of complicated machine setupProvide a stronger productEasy assembly by providing self aligning joints