Identificador: 3175
Abierta
ID de articulo : # 3175 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2EX-XS-2E43 - LIJADORA DE BANDA ANCHA - 2 BANDAS - 43" ANCHO
43" 30 / 25 HP Excess Series Wide-Belt Sander
60″ belt length
Mono-block construction increases durability
Dual display digital thickness controller
Omron electronic eye sanding belt tracking
Wye-delta soft start
Regal variable speed drive unit
Quality pneumatic controls by Camozzi
Automatic conveyor belt tracking
Auto thickness device for easy set up
Excess Series
Exceess Series wide belt sanders use a 60″ belt. Theses machines have the same quality construction as our larger machines, but are affordable enough for even the smaller manufacturers. Truly an “excessive” amount of features for sander in its class.
Specifications:
Horsepower: 30/25HP
Voltage: 230V or 460V
Phase(s): 3PH
Belt Size: 43" x 60"
CFM Requirement: 4200
Main Motor: 30 / 25 HP
Feed Motor: 3 HP
Elevation Motor: 0.5 HP
Contact Drum Size: 8" / 4.75"
Conveyor Speed (ft/min): 15 - 50
Max Thickness: 6"
Min Thickness: 1/8"
Width: 43"
Head Count: 2
Amps (220V / 460V): 148A / 74A
Weight: 5100 lbs
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TORNO 16'' X 60''
TORNO 16'' X 60'' PARTE: 2GM-GML-1660HD16” x 60”, 2-1/16” bore, 6 HPISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece solid cast iron machine baseHeavy Duty guideway width 10-1/4”Heavy Duty main motor 6 HP16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm45 kinds of inch threads, and 39 kinds of metric threadsThreading and feeding rate change without ch...
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL Y VERTICAL
PARTE: 2PI-HPJV - ESPIGADORA HORIZONTAL Y VERTICALIs a Horizontal and Vertical Bore and Dowel insertion CNC machining center used for case construction in cabinet and/or furniture manufacturing. One of the best bore drilling machines available.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and Point to Points by shifting boring and doweling
-500x500.jpg)
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P24HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...
AMXmachinery1
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTRO
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTROControl Unit: TPA Control UnitX AXIS - 1100 MMY AXIS - 1300 MM
Z AXIS - 700 MM• Y1/ Y2 Axis Motor: 1.5 kw Rack and Pinon• X Axis Motor: 1.5 kw Rack and Pinon• Z Axis Motor: 3 kw Ball Screw with break• Reductor: Liming FE Series• Spindle Motor: ML-1C 7.5/12 24 ER32 CROSS 2+2 ENDS• Vacuum System: Backer Vacuum 250 M^3• Oiling System: ILC Self Lubrication System• Machine Dimension: Length: mm * Width: mm * Height:...