Identificador: 3196
Abierta
ID de articulo : # 3196 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX- XR-14BX - SIERRA RAJADORA - 1 DISCO - 14"
Details:
- 15 HP Main motor
- Huge 45″ x 61″ table available
- 6 full hold down rollers
- Variable feed speeds from 50-120 ft/min
- 8′ Guaranteed Glue Line
- Disc Brakes
- Micro adjust fence with handwheel
- Triple anti-kickback fingers
- 18″ wide ripping capacity
- Automatic Oiler with low-oil warning
- Wye-Delta soft start
- Heat treated chain and race
- Amp meter
- Square D Electrical controls
Specifications:
- Horsepower: 15HP
- Voltage: 230V or 460V
- Phase(s): 3PH
- Blade Size: 14"
- Main Motor: 15 HP
- Feed Motor: 1.5 HP
- Blade Speed: 3600
- Feed Speed: 50 - 120
- Max Rip Capacity: 18"
- Working Height: 33.5"
- Table Size: 37-1/2" x 61"
- Dust Collection Requirement: 1000 CFM
- Hold Down Rollers: 6
- Chain Rail Length: 28"
- Chain Pad Width: 7"
- Guaranteed Glue Line Length: 8'
- Set of Anti-Kickback Fingers: 3
- Disc Brakes: Yes
- Oiler System: Auto w/ warning
- AMPS (230V/460V): 45A / 23A
- Max Thickness Capacity: 3"
- Weight: 3200 lbs
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS
COLECTOR DE POLVOS PARTE: 2GM-WDC-2100Our wet dust collector system offers safe and efficient method for collecting hazardous dust particles cause by grinding, sanding, or cutting metals. If you’re in the market for a stainless steel wet dust collector that helps eliminate hazardous matter from your machine shop that is created by either a grinding, sanding, or a cutting process, then look no further. Call us today to better understand your process/application and pr...
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA ANCHA - 2 BANDAS - 37" ANCHO
PARTE: 2EX-XS-2E37 - LIJADORA DE BANDA ANCHA - 2 BANDAS - 37" ANCHO37" 25 / 20 HP Excess Series Wide-Belt Sander60″ belt lengthMono-block construction increases durabilityDual display digital thickness controllerOmron electronic eye sanding belt trackingWye-delta soft startRegal variable speed drive unitQuality pneumatic controls by CamozziAutomatic conveyor belt trackingAuto thickness device for easy set upDetails:Excess SeriesExcess Series wide belt sanders use a 60″ belt. Theses machines ...
-500x500.png)
AMXmachinery1
LIJADORA CALIBRADORA 37" - BANDA ANCHA - 1 LIJA
PARTE: 2SS-WBS3760101 - LIJADORA CALIBRADORA 37" - BANDA ANCHA - 1 LIJAOur American Made Wide Belt Sander will improve your finishing time, decrease your hand sanding and increase your productivity. Available with either a 10 horsepower, single phase or a 15 horsepower, three phase motor these American made wide belt sanders are workhorses that will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt15 Hp, 3 Phase (3~) 208 Volt / 230 Volt460 Volt, 3 Phase (3~), 15 HpWide Belt...
-500x500.png)
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES ANGULARES
PARTE: 4ST-CT 600 - SIERRA OPTIMIZADORA - CORTES ANGULARESCROSSCUT SAW WITH AUTOMATIC PUSH-FEED FOR ANGLED CUTOPTIMISED CUTTING Is a crosscut saw with automatic push-feed with complete optimisation and defection of the boards.Thanks to its rotating table, it is the optimal solution for all straight (90°) and angular (+/- 70°) cutting for bothsingle board and stack sawing.The pusher is designed with a rack and pinion feed system and brushless motor to ensure maximum cutting precision.The softw...