Identificador: 3209
Abierta
ID de articulo : # 3209 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX-DB-150 - EXTRACTOR DE POLVOS - 15 HP
Our dust blowers are made up of a heavy duty dynamically balanced vaneaxial fan
with safety guards on all inlets. The steel impeller is mounted directly to the shaft of
the stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phase
electric and have options for magnetic starters and remote control. Single phase
electric motors are available for blowers up to 7.5 horsepower.
Magnetic starter included.
See comparison chart below for specifications
|
|
|
10HP 3PH Dust Collection Blower |
15HP 3PH Dust Collection Blower, 7900CFM |
20HP 3PH Dust Blower |
25HP 3PH Dust Blower |
7.5HP 3PH Dust Blower |
|
Amps |
1PH: 27A @ 220V 3PH: 17A @ 220V |
27A @ 220V |
37A @ 220V |
49A @ 220V |
60A @ 220V |
1PH: 38A @ 220V 3PH: 20A @ 220V |
|
Cfm |
3200 |
6350 |
7900 |
8375 |
10350 |
4700 |
|
Fan rpm |
3450 |
3450 |
1725 |
1725 |
1725 |
3450 |
|
Fan size |
13" |
14" |
25" |
26" |
27" |
13.5" |
|
Horsepower |
5HP |
10HP |
15HP |
20HP |
25HP |
7.5HP |
|
Inlet-size |
10" |
12" |
14" |
16" |
18" |
12" |
|
Outlet size |
12" |
14" |
16" |
18" |
20" |
14" |
|
Phase |
1 or 3 |
3 |
3 |
3 |
3 |
1 or 3 |
|
Weight |
280 lbs |
360 lbs |
750 lbs |
810 lbs |
850 lbs |
330lbs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE
PARTE: 3HO-MZ73211 - TALADRO MULTIPLEThe machine is used to drill furniture parts on horizontal and vertical planes, and can also be used for 45 and 90 degree drilling for further assembly of frame structures, facades and other products.
AMXmachinery1
ENCHAPADORA DE CANTOS - MANUAL PORTABLE
PARTE: 2CK-MX550AUIs a versatile portable edgebanding solution for the hobbyist or industrial user. It is capable of edgebanding radius or straight workpieces and can be operated as a handheld unit (standard) or a stationary system with the optional table accessory. The edgebander is equipped with a glue pot which uses granulated hot melt glue with an operating temperature range from 120oC to 200oC (250oF to 390oF). The full kit includes the portable edgebander, power trimmer, workpiece ...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350MR - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILLEntry-level machine with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system whic...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-0610MD6 foot hydraulic metal shears can cut up to 10 gauge by 72” wide mild steel sheet metal. A hardened shearing blade is installed and pre-gapped ready for buyers to operate upon arrival. Our light duty hydraulic shears are dependable and deliver sharp razor cuts with ease.Taiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke ...