Identificador: 3210
Abierta
ID de articulo : # 3210 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX-DB-200 - EXTRACTOR DE POLVOS - 20 HP
Our dust blowers are made up of a heavy duty dynamically balanced vaneaxial fan
with safety guards on all inlets. The steel impeller is mounted directly to the shaft of
the stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phase
electric and have options for magnetic starters and remote control. Single phase
electric motors are available for blowers up to 7.5 horsepower.
Magnetic starter included.
See comparison chart below for specifications
|
|
|
10HP 3PH Dust Collection Blower |
15HP 3PH Dust Collection Blower, 7900CFM |
20HP 3PH Dust Blower |
25HP 3PH Dust Blower |
7.5HP 3PH Dust Blower |
|
Amps |
1PH: 27A @ 220V 3PH: 17A @ 220V |
27A @ 220V |
37A @ 220V |
49A @ 220V |
60A @ 220V |
1PH: 38A @ 220V 3PH: 20A @ 220V |
|
Cfm |
3200 |
6350 |
7900 |
8375 |
10350 |
4700 |
|
Fan rpm |
3450 |
3450 |
1725 |
1725 |
1725 |
3450 |
|
Fan size |
13" |
14" |
25" |
26" |
27" |
13.5" |
|
Horsepower |
5HP |
10HP |
15HP |
20HP |
25HP |
7.5HP |
|
Inlet-size |
10" |
12" |
14" |
16" |
18" |
12" |
|
Outlet size |
12" |
14" |
16" |
18" |
20" |
14" |
|
Phase |
1 or 3 |
3 |
3 |
3 |
3 |
1 or 3 |
|
Weight |
280 lbs |
360 lbs |
750 lbs |
810 lbs |
850 lbs |
330lbs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
INSERTADORA DE PERNOS
PARTE: 2PI-H49 - INSERTADORA DE PERNOSIs a horizontal point to point bore and dowel insertion machining center.It is designed to CNC position the spindle, bore a hole, then CNC position the inserter, inject glue or water (for pre-glued dowels), and fire the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and point to points by shifting boring and doweling
AMXmachinery1
DESCARGADOR DE TOLVAS - ALTA CAPACIDAD - 3HP
PARTE: 2EX- RC-10 -DESCARGADOR DE TOLVAS - ALTA CAPACIDAD - 3HPThis 3-phase high capacity airlock rotary feeder has a transfer capacity of 38 CFM and uses a 3 amp, 1 HP motor. It also comes equipped with both a 16-inch inlet and outlet port and weighs 300 pounds. Magnetic starter included. See comparison chart below for specifications.
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL - INSERTADORA DE PERNOS
PARTE: 2PI-HPJ - ESPIGADORA HORIZONTAL - INSERTADORA DE PERNOSIs a horizontal point to point bore and dowel insertion machining center. It is designed to CNC position the spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and Point to Points by shifting boring and doweling
AMXmachinery1
RUEDAS DE REPUESTO - ALIMENTADOR
PARTE: 2EX-RO-12 - RUEDAS DE REPUESTO - ALIMENTADORDetails:Complete Roller (4-3/4″ x 2-5/16″)This listing is for a set of one (1) new rubber power feeder roller with the following dimensions:Diameter: 120mm (4-3/4 inches)Width: 60mm (2-5/16 inches)This replacement wheel is designed for most 1 horsepower feeders equipped with split rims. It includes both the tire and wheel molded into one unit for convenience and durability.