Identificador: 3284
Abierta
ID de articulo : # 3284 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2CC-C500R - SIERRA TRONZADORA - REACONDICIONADA
Originally Manufactured in 1980
SC Industrial Resource Group
Completely rebuilt in 2020
5 HP motor that can be wired for 240, or 480 voltage 3 Phase
New Magnetic Starter with 110 Control Voltage
Arbor & Air Cylinder completely rebuilt
Fresh Powder Coat
Cutting Capacity is 2" x 8"
FOB - Manawa, WI
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJA
PARTE: 2SS- WBS4375101 - LIJADORA CALIBRADORA 43" - BANDA ANCHA - 1 LIJAOffering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt 460 Volt, 3 Phase (3~), 20 HpThe 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt trans...
AMXmachinery1
COLECTOR DE POLVOS - 5 HP - CICLON
PARTE: 2EX-DC-250.3 - COLECTOR DE POLVOS - 5 HP - CICLONIs powered by a 5 horsepower TEFC motor and is equipped with 2 1-micron filter bags. It features a 117 square foot filter area with 32 cubic feet of storage capacity measuring 148 inches tall by 128 inches wide by 56 inches deep. This three-phase dust collector has 27 amps at 220 volts. Free air cfm 6400 with working cfm up to 5500 cfm. This unit is self contained unit with that includes cyclone, motor, filters, and magnetic starter made f...
-500x500.png)
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES ANGULARES
PARTE: 4ST-CT 600 F - SIERRA OPTIMIZADORA - CORTES ANGULARESCROSSCUT SAW WITH AUTOMATIC PUSH-FEED FOR ANGLED CUTOPTIMISED CUTTING AND NOTCHING Is a crosscut saw with automatic push-feed with complete optimisation and defection of the boards.Thanks to its rotary table, it is the optimal solution for all straight (90°) and angular (+/- 70°) cutting for bothsingle board and stack sawing.The push-feed is designed with a rack and pinion feed system and brushless motor to guarantee maximum cutting ...
-500x500.png)
AMXmachinery1
CEPILLO DE ALAMBRE - 2 CABEZAS
PARTE: 2CK-BS600-2H - CEPILLO DE ALAMBRE - 2 CABEZASProduce distressed wire brush flooring and paneling with ease!Is designed to remove the soft grain between the growth rings to produce distressed wood flooring, paneling, and more. Following the wire brush head is a nylon brush that is designed to remove any raised fibers that appear from the wire brushing. With variable frequency inverters to control the brush RPM and feed speed you have ultimate control over your finished aesthetic.Ergonomi...