Identificador: 3225
Abierta
ID de articulo : # 3225 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX-DC-250.3 - COLECTOR DE POLVOS - 5 HP - CICLON
Is powered by a 5 horsepower TEFC motor and is equipped with 2 1-micron filter bags. It features a 117 square foot filter area with 32 cubic feet of storage capacity measuring 148 inches tall by 128 inches wide by 56 inches deep. This three-phase dust collector has 27 amps at 220 volts. Free air cfm 6400 with working cfm up to 5500 cfm. This unit is self contained unit with that includes cyclone, motor, filters, and magnetic starter made for simple set up. Drums not included.
|
|
|
3HP 1PH Cyclone Dust Collector, 230V
|
5HP 3PH Cyclone Dust Collector
|
7.5HP 3PH Cyclone Dust Collector
|
|
Amps
|
27A @ 220V |
15A @ 220V |
1PH: 27A @ 220V 3PH: 17A @ 220V |
1PH: 38A @ 220V 3PH: 20A @ 220V |
|
Cfm
|
6400 |
1785 |
2975 |
4850 |
|
Dimensions
|
148″ x 128″ x 56″ |
123″ x 65″ x 42″ |
140″ x 110″ x 50″ |
140" x 120" x 50" |
|
Dual barrel design
|
true |
— |
— |
— |
|
Fan rpm
|
3450 |
3450 |
3450 |
3450 |
|
Fan size
|
16" |
13″ |
14.25″ |
14.75" |
|
Filter-bags
|
2 |
1 |
2 |
2 |
|
Filter area
|
117 |
37 |
59 |
117 |
|
Horsepower
|
10HP |
3HP |
5HP |
7.5HP |
|
Impeller size
|
16" |
13″ |
14-1/4″ |
14.75" |
|
Inlet-size
|
13" |
8″ |
10" |
12" |
|
Motor
|
TEFC 10 HP |
TEFC 3 HP |
1PH: BALDOR 5 HP 3PH: TEFC 5 HP |
1PH: BALDOR 7.5 HP 3PH: TEFC 7.5 HP |
|
Phase
|
3 |
1 |
1 or 3 |
1 or 3 |
|
Static pressure
|
16" |
10″ |
12″ |
13.5" |
|
Storage capacity
|
32 |
12.78 |
11 |
24 |
|
Weight
|
750 lbs |
260 lbs |
440 lbs |
540 lbs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
EXTRACTOR DE POLVOS - FILTRO - 3 SECCIONES
PARTE: 2EX-DCF-327 - EXTRACTOR DE POLVOS - FILTRO - 3 SECCIONESTyphoon offers 3 sections baghouse sock filter in open or enclosed models. Both of these models have 9 filter socks per section with a 16 inch inlet port to fit the magnum series dust collectors. The open model should not be used in direct exposure of rain or water, while the enclosed model is for outdoor use.
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS PARA PIEZAS RECTAS Y CURVAS DE USO LIGERO
PARTE: 3HO-S300P - ENCHAPADORA DE CANTOS PARA PIEZAS RECTAS Y CURVAS DE USO LIGEROVoltage: 110/220VGlue pot volume: 1000mlMax trimming height: 40mmVoltage110/220VGlue pot volume1000mlMax trimming height40mmBanding tapethickness0.3-3.0mmWorking pressure3~6kg/cm squareEdge Banding Height10-60mmWorking temperature130-180℃Feed speed0-6m/minGluing power20wFeeding power60wTrimming power650w*2Polishing power180w*2Dust collecting power1200wFunctionGluing(Straight and Curve), End Trimming, Fine Trimmin...
-500x500.jpg)
AMXmachinery1
CEPILLO 2 CARAS - 30 PULGADAS
PARTE: 2CK-GT760ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...
AMXmachinery1
LIJADORA DE BANDA ANCHA - 43 PULGADAS
PARTE: 2CK-C431Is compact and versatile with a combination sanding unit for calibration and final sanding. The robust sanding unit and heavy-duty frame ensures optimum sanding results. Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.Accurate digital thickness control with both Inch & Metric settings allows operator to key in the desired thickness and table will automatically move into position.Small footprintCombination sanding unit with 5...