Identificador: 3296
Abierta
ID de articulo : # 3296 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2LO-PT-HF1210-30FT - PRENSA DE RADIO FRECUENCIA - 12" X 10" X 30FT
- Special design for mass production for engineer flooring, door stile, long panel, 2 to 3 minute to dry per cycle.
- Automatic infeed, outfeed cycle, mass production within 3 - 5 minutes is ready for output.
- Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.
- Equipped with a massive upper plate that supplies powerful hydraulic pressure which presses each part of wood board to make even the most crooked pieces of wood flat.
- Due to the flatness it has made, it may not need to pass through double side planer processing.
- This substantially reduces wood loss.
- User friendly operations; it is equipped with side automatic inlet and outlet feeding table system for continuous and mass production.
- Top quality wood board is manufactured by way of glue cured and completely hardened glue joins with high frequency heating in the meantime.
- All processing steps are integrated into the HMI interface control panel for easy one-touch control on the screen.
- Utilizes high frequency, glue cured evenly from inner of the glue line of the wood.
Specification:
| Model No. | PT-HF1210-30FT |
| In Put Power | 100 KVA |
| Out Put Power | 60 KW |
| Max. Working Width | 10" |
| Max. Working Heigth | 12" |
| Maximum Working Length | 30ft |
| Pressure | 140 kg/cm2 |
| Hydraulic Pump | 15 HP |
| Press Cylinder (top) | 8 Pcs |
| Press Cylinder (Rear) | 46 Pcs |
| Driving Conveyor | 3 Units |
| In & Out Feed Belts Conveyor | 30 ft Length each |
| Machine Weight | 8000 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA ANCHA - 2 BANDAS - 37" ANCHO
PARTE: 2EX-XS-2E37 - LIJADORA DE BANDA ANCHA - 2 BANDAS - 37" ANCHO37" 25 / 20 HP Excess Series Wide-Belt Sander60″ belt lengthMono-block construction increases durabilityDual display digital thickness controllerOmron electronic eye sanding belt trackingWye-delta soft startRegal variable speed drive unitQuality pneumatic controls by CamozziAutomatic conveyor belt trackingAuto thickness device for easy set upDetails:Excess SeriesExcess Series wide belt sanders use a 60″ belt. Theses machines ...
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2LO-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...
AMXmachinery1
DEPOSITO DE AUTODESCARGA
PARTE: 2EX- RH-L1.5 - DEPOSITO DE AUTODESCARGA These self dumping hoppers range in volume from 1 to 2 yards and all have a weight capacity of 1 ton.
AMXmachinery1
EXTRACTOR DE POLVOS - 5HP
PARTE: 2EX-DB-50.3 - EXTRACTOR DE POLVOS - 5HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specific...