Identificador: 3296
Abierta
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2LO-PT-HF1210-30FT - PRENSA DE RADIO FRECUENCIA - 12" X 10" X 30FT
- Special design for mass production for engineer flooring, door stile, long panel, 2 to 3 minute to dry per cycle.
- Automatic infeed, outfeed cycle, mass production within 3 - 5 minutes is ready for output.
- Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.
- Equipped with a massive upper plate that supplies powerful hydraulic pressure which presses each part of wood board to make even the most crooked pieces of wood flat.
- Due to the flatness it has made, it may not need to pass through double side planer processing.
- This substantially reduces wood loss.
- User friendly operations; it is equipped with side automatic inlet and outlet feeding table system for continuous and mass production.
- Top quality wood board is manufactured by way of glue cured and completely hardened glue joins with high frequency heating in the meantime.
- All processing steps are integrated into the HMI interface control panel for easy one-touch control on the screen.
- Utilizes high frequency, glue cured evenly from inner of the glue line of the wood.
Specification:
| Model No. | PT-HF1210-30FT |
| In Put Power | 100 KVA |
| Out Put Power | 60 KW |
| Max. Working Width | 10" |
| Max. Working Heigth | 12" |
| Maximum Working Length | 30ft |
| Pressure | 140 kg/cm2 |
| Hydraulic Pump | 15 HP |
| Press Cylinder (top) | 8 Pcs |
| Press Cylinder (Rear) | 46 Pcs |
| Driving Conveyor | 3 Units |
| In & Out Feed Belts Conveyor | 30 ft Length each |
| Machine Weight | 8000 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
DESCARGADOR DE TOLVAS - 3HP
PARTE: 2EX-RC-04 - DESCARGADOR DE TOLVAS - 3HPThis 3-phase standard airlock rotary feeder has a transfer capacity of 10 CFM and uses a 3 amp, 1/2 HP motor. It also comes equipped with both a 16-inch inlet and outlet port and weighs 77 pounds. View drawing and dimensions here. Magnetic starter included. See comparison chart below for specifications.
-500x500.png)
AMXmachinery1
PARTE: 2BE-BEL – COLECTORES DE POLVOS – MODULARES
PARTE: 2BE-BEL – COLECTORES DE POLVOS – MODULARESNuevos con garantía 5 HP - BEL50XL - 230/460V7.5 HP - BEL75XL - 230/460V10 HP - BEL100XL - 230/460V15 HP - BEL150XL - 230/460V20 HP - BEL200XL - 230V - 460V PODEROSAS, BAJO EN RUIDO, SISTEMAS PARA INTERIORES DE COLECCION DE ASERRIN
Ranging
from 5 HP to 20 HP, it offers high efficiency and a full range of features. Designed in compliance with NFPA.
Optimized for maxim...
AMXmachinery1
PRENSA HIDRAULICA UNIVERSAL
PARTE: 4ST-UNI - PRENSA HIDRAULICA UNIVERSALUNIVERSAL HYDRAULIC PRESSCLASSICS FOR GLUINGIs a hydraulic press for gluing blockboard, frames, cabinet doors, drawers, doors and furniture.Thanks to its solid vertical frame, it reduces and optimises space in the workshop and becomes the universal solutionfor small and medium-sized production facilities.The work unit consists of practical and functional manual hydraulic cylinders.Cast iron squares for precise reference of the work area.Technical speci...
AMXmachinery1
LIJADORA DE BANDA ANCHA - MESA FIJA - 1 A 4 BANDAS
PARTE: 2CK-SUIncorporates a fixed table along with upper moving sanding units. This makes it ideal for in-line sanding or for use with conveyors as they do not need to be adjusted when changing material thickness. The digital thickness control will program the sanding units in accurately and precisely each time. The SU series is available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (...