Identificador: 330
Abierta
ID de articulo : # 330 se ha agregado a su lista de deseos.
Descripción
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICA
An Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in Italy
As compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !
Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets.
Occupies about the same footprint as a sliding table saw but doesn't require valuable floor space in front or behind like a sliding table saw does.
Side-by-side comparison proved Concept 350 can be up to 3x more productive than a slider.
Extremely easy to use ... and there is no complicated programming to learn.
Sizes panels accurately and chip free with a very unique single blade scoring function.
Bevel cutting of 0-46 degrees is possible with the standard electronically controlled blade tilt.
The large diameter blade in conjunction with the massive pressure beam allows the operator the ability to safely stack or book cut multiple panels.
The 300 - 350 mm blade is completely enclosed during the entire cutting cycle thus insuring operator safety.
Video de la maquina funcionando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12631 – TROMPO AUTOMATICO – REDONDO – LOBO
PARTE: 12631 – TROMPO AUTOMATICO – REDONDO – LOBO
USADO – MUY BUENAS CONDICIONESThe
only issue we can find is the one top display light is out.Everything
else is functional. It
features dual 1-1/4″spindles that are 5-5/8″ tall.This
fully functional machine has been fully cleaned, checked, and is ready to work
from the time you receive it. Model LH-40-TCCutting
capacity ...
AMXmachinery
PARTE: AMX-12492 - EXTRACTOR DE TURBINA
PARTE: AMX-12492 -
EXTRACTOR DE TURBINAVideo: https://vimeo.com/870512842
AMXmachinery
PARTE: 1SL-DC-SB10G - SAND BLASTER - TANQUE 10 GALONES
PARTE: 1SL-DC-SB10G - SAND BLASTER - TANQUE 10 GALONESPresión requerida 60-125 psi, volumen 6 a 25 CFM dependiendo de la medida de la boquillaIncluye: Pistola, ajuste de presión, 4 boquillas de cerámica .10”, .125”, .150”, .175”, manguera de 9 pies (2.7 metros)Dimensiones totales: 33-1/2” x 18-3/4” x 13”
AMXmachinery
ESPIGADORA 2 MESAS
PARTE: 2TA-SET-100 - 3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERYNueva con garantiaBuilt with two working tables for high efficiency operations.Table longitudinal traverse is pneumatic operated for smooth cutting.Tenon’s width is easily adjustable by hand wheel.Convenient tenon depth adjustment from outside without removing covers.Table can be tilted to 20 degrees at each side for angular tenon.Cutter moving speed is infinitely adjustable to achive the best results.Pneumatic hold down c...