Identificador: 330
Abierta
Descripción
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICA
An Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in Italy
As compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !
Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets.
Occupies about the same footprint as a sliding table saw but doesn't require valuable floor space in front or behind like a sliding table saw does.
Side-by-side comparison proved Concept 350 can be up to 3x more productive than a slider.
Extremely easy to use ... and there is no complicated programming to learn.
Sizes panels accurately and chip free with a very unique single blade scoring function.
Bevel cutting of 0-46 degrees is possible with the standard electronically controlled blade tilt.
The large diameter blade in conjunction with the massive pressure beam allows the operator the ability to safely stack or book cut multiple panels.
The 300 - 350 mm blade is completely enclosed during the entire cutting cycle thus insuring operator safety.
Video de la maquina funcionando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PLACA CHAPA - SUBLIMADA
PARTE: P-CHAPA-002-S - BASE RECTANGULO - CHAPA - COLOR CAOBA - SUBLIMADAChapa de Madera Natural5/8” espesor 1 ranura vertical y 1 ranura horizontal por atras Medidas: 8 x 10" 9 x 12" 10.5 x 13"
AMXmachinery
PARTE: 12504 - COMPRESOR DE TORNILLO - 250 HP – ATLAS COPCO – 440V
PARTE: 12504 - COMPRESOR DE TORNILLO - 250 HP – ATLAS COPCO
– 440V
2 USADOS – BUENAS CONDICIONES1 USADO - PARA PARTES
AMXmachinery
PARTE: 12642 - MOLDURADORA - 4 CABEZALES - MATTISON - 276
PARTE: 12642 - MOLDURADORA
- 4 CABEZALES - MATTISON - 276
USADA - BUENAS
CONDICIONESTablero
electrico 440 volts
4 motores con
cabezales y acentadores
Mesa de salida
co regla de corte con serruchos de corte a 16 pies delargo con marimba para
cada largo de molduras
Regla de
rodillos con pendulo p igualar el largo
del buĺto
Tuberia de
extraccion
AMXmachinery
CABEZALES PARA MOLDURADORA - NAVAJAS RECTAS
CABEZALES PARA MOLDURADORA - NAVAJAS RECTAS4 NAVAJAS – 12/20 GRADOSWeinig, Wadkin, SCMI, IIDA, Leadermac, Woodmizer, SilverLongitud de Corte, Diametro Flecha, Parte #50mm (1.96") 40mm MH-122-4-50D 1.5" MH-122-4-50D-1.560mm (2.36") 40mm MH-122-4-60D 1.5" MH-122-4-60D-1.580mm (3.15") 40mm MH-122-4-80D 1.5" MH-122-4-80D-1.5100mm (3.94") 40mm MH-122-4-100D ...