Identificador: 3304
Abierta
ID de articulo : # 3304 se ha agregado a su lista de deseos.
Descripción
PARTE: 2LO-CM-100 - 3YC-YOM-120 - ESCOPLO OSCILANTE - 2 MESAS - AMX MACHINERY
Nueva con garantia
- A faster rectangular mortise machine provides variable oscillating speed at 7 ~ 200 strokes per minute.
- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.
- Pneumatic hold down clamps and pneumatic depth movement for smooth finish.
- Fully automatic mortise produce cycles simply by stepping on the foot pedal.
- Hydraulic pistons for drilling depth speed control, enable for best results.
- Width and depth of mortising is easily adjustable.
- Table can be tilted 20 degrees at each side for angular slot.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long-life bearing.
- Heavy cast iron frames and table for durability usage.
SPECIFICATIONS | SET-100 | CM-100 |
Max. Width of Tenon (Mortise) | 4" | 4" |
Max. Depth of Tenon (Mortise) | 2" | 2-3/8" |
Oscillation Rate | 13 ~ 80 PCS/MIN. | 7 ~ 200 STROKE/MIN. |
Table Tilts | 20° | 20° |
Spindle Drive Motor | 3 HP | 3 HP |
Cutter Feed Motor | 1 HP | ½ HP |
Cutter Speed | 9500 RPM | 9500 RPM |
Table Vertical Adjustment | 3" | 3" |
Max. Thickness | 4" | 4" |
Max. Stoke Width | 5" | 4" |
Air Pressure | 80 PSI | 80 PSI |
Machine Size | 63" x 51" x 51" | 51" x 47" x 47" |
N.W. | 2200 LBS | 1540 LBS |
G.W. | 2640 LBS | 1880 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
RESACADORA SENCILLA – 60” CAPACIDAD LARGO
PARTE: 2FA-NXL-48 – RESACADORA SENCILLA
– 60” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 800 RESAQUES/HRStandard FeaturesCutter Head is Never ExposedTable Moves w/Dual Air Rams Á Linear BearingsDouble Clamp System Machine SpecsDimensionsLength: 60"Width: 90"Height: 50"Table Height: 37" Power20 HP Electric Motor: 208/230/480/3/60 TEFCCompletely pre-wired motor starter with start/stop
buttons and circuit overload protection SpecificationsArbor & Bearing Size: 2"Approx. 2000 lbsTabl...
AMXmachinery
PERSONALIZADOR PARA PLUMAS
PARTE: P-BASE-104 - PERSONALIZADOR PARA PLUMAS - MADERA SOLIDA - COLOR CAOBAMadera solidaEspacios laterales para colocar plumas Medidas: 3.5 x 12"
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
PARTE: 12160 – PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
USADA – MUY BUENAS CONDICIONES
Year of manufacture 2008
Opening width mm 2.800
Veneer thickness min mm 0,3
Veneer thickness max mm 1,5
Strip width min mm 50
Strip width max mm 600
Feed rate max m/min 36
Cross splicing machine Yes
Edge gluing Yes
Trimming unit Yes
Rip cut Veneer clipper
Joint Only edge gluing
Controls and software:
SIEMENS SIMATIC PANEL
CE marking Yes
Total con...
AMXmachinery
TORNO COPIADOR - REGULAR - GENARI
PARTE: 12290 - TORNO COPIADOR - REGULAR - GENARI
USADO - BUENAS CONDICIONES
MOTOR 5 HP, 220v, 3 FASES
DISTANCIA ENTRE PUNTOS: 1.20 METROS