Identificador: 331
Abierta
ID de articulo : # 331 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-TS-P330 - SIERRA DE PANELES AUTOMATICA
| Specifications | 2TA-TS-P330 | |
|---|---|---|
| Capacity | Max. Cutting Length | 126" (3200 mm) |
| Max. Cutting Depth | 3" (80 mm) | |
| Max. Cutting Height | 126" (3200 mm) | |
| Main Sawblade | Diameter | Ø14" (Ø355 mm) |
| Arbor Diameter | Ø1" (Optional: 1" (30 mm)) | |
| Speed | 4800 RPM | |
| Scoring Sawblade | Diameter | Ø7" (Ø180 mm) |
| Arbor Diameter | Ø1" (Optional: 1" (30 mm)) | |
| Speed | 6500 RPM | |
| Saw Carriage | Feeding Forward Speed | 5 ~ 37 M/ min |
| Return Speed | 67 M/ min | |
| Motor | Main Sawblade Motor | 13 HP (Optional:15 HP) |
| Saw Carriage Drive Motor | 2 HP | |
| High Pressure Blower Motor | 3 HP | |
| Other | Automatic Panel Feed Speed | 30 M/ min |
| Working Air Pressure | 5 ~ 6 kg/ cm² | |
| Table Height from Floor | 32" (820 mm) | |
| N. W. | 9923 LBS (4500 kg) | |
| Machine Dimensions (mm) | 232" x 244" x 60"(5893 x 6198 x 1524 mm) | |
- Features:
- Cutting large panels quickly and efficiently is a necessity in today’s competitive markets.
- The computer panel saw with gripper will bring you the capacity to cut panels quickly, easily and accurately.
- The computer panel saw promises dramatic productivity gains with this features: advanced computer control, high efficiency automatic gripper feed system, reduced cycle time, and prefect square cutting accuracy, all at an economical price.
- Great select memory capacity permitting for single or multiple sizes at groups of quantity cutting.
- Employed with touch control screen for convenient operations, eliminating the problem of dust contamination.
- Featuring a self diagnostic function, provide with comprehensive probable cause of trouble and detailed trouble shooting guide, allowing the operator to correct problems easily.
- Superior software system is designed for human and machine interface.
- The base is welded from cold rolling steel plate, offers rugged construction.
- Automatic saw stroke enable to only cutting the panel actuary length and return right away, this reduce considerable cycle time.
- The saw carriage runs with bronze wheel, which is CNC lathe precision machined or accurate concentricity producing fine smooth surface cut.
- The guide rods, hard chrome plated, provide rigid support for saw carriage. The ripping accuracy is guaranteed.
- The machine employs an advanced, high performance limit switch, its highly sensitive performance ensures extremely accurate saw stroke control.
- The saw carriage feed is driven by rugged wire.
- The scoring blade may be laterally adjusted for a burr free cut or vertically adjusted for proper depth of cut and to compensate for blade wear.
- The Table surfaces are covered with bakelite to prevent scratching of the panel during feeding.
- Panels feed through the linear motion guide for greater accuracy and less effort.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENROLLADORA LAMINADOS
PARTE # 2EV-7100 - ENROLLADORA DE LAMINADOS - EVANS 7100 This machine not only rolls your laminate but it also helps you tape or tie the roll and, with our optional tilt takeaway conveyor (7110), gently lowers your heavy roll to the floor.This automated roller takes care to gently wrap the laminate into two different roll diameters for shipping. No more struggling to wrap by hand.This heavy duty machine plugs right into the wall with 110 power and require 90 psi of shop air to operate.110 Vol...
AMXmachinery
PARTE: 1SL-DC-DC2047 - COLECTOR DE ASERRIN DE 7 HP
PARTE: 1SL-DC-DC2047 - COLECTOR DE ASERRIN DE 7 HPNUEVO CON GARANTIAMOTOR: 7 HP, 220V, 60 Hz, 3 FASESCAPACIDAD DE SUCCION: 3,500 CFMNUMERO DE BOLSAS Y FILTROS: 4BOLSAS SUPERIORES: 46" ALTOBOLSAS INFERIORES: 32" ALTOMEDIDAS TOTALES: 220 CM LARGO X 100 CM ANCHO X 220 CM ALTOPESO: 100 KGSTIPO DE EMPAQUE: 1 CAJAENTRADA DE 7" DIAMETRO Y CON 1 TAPA CON 4 ENTRADAS DE 4" DIAMETRO CADA UNA
AMXmachinery
SIERRA VERTICAL ELCON ESPECIAL 1
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUMA vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
AMXmachinery
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MM
PARTE: 12110 - CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MMUSADOS – COMPLETOS - EN BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
9,100.00 MXN