Identificador: 633
Abierta
ID de articulo : # 633 se ha agregado a su lista de deseos.
Descripción
PARTE: 5PW - REFACCIONES PLANTAS ELECRICAS POWEREN
- AVR
- ROTOR
- ESTATOR
- PORTA CARBONES
- BATERIAS
- MARCHAS
- TANQUES
- SOPORTES
- PISTONES
- ANILLOS
- BIELAS
- VALVULAS
- RETRACTIL
- KIT DE AFINACION
- FILTRO DE AIRE
- CARBURADOR
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
COLECTOR DE POLVOS 7 HP
PARTE: 1SL-DC-DC2047 - COLECTOR DE POLVOS 7 HPNUEVO CON GARANTIAMOTOR: 7 HP, 220V, 60 Hz, 3 FASESCAPACIDAD DE SUCCION: 3,500 CFMNUMERO DE BOLSAS Y FILTROS: 4BOLSAS SUPERIORES: 46" ALTOBOLSAS INFERIORES: 32" ALTOMEDIDAS TOTALES: 220 CM LARGO X 100 CM ANCHO X 220 CM ALTOPESO: 100 KGSTIPO DE EMPAQUE: 1 CAJAENTRADA DE 7" DIAMETRO Y CON 1 TAPA CON 4 ENTRADAS DE 4" DIAMETRO CADA UNA
AMXmachinery
SIERRA ESCUADRADORA - 3200 MM
PARTE: 2LO-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM NUEVA CON GARANTIAHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carria...
AMXmachinery
PRENSA ARMADORA DE GABINETES - 98” X 55”
PARTE:
12442 - PRENSA ARMADORA DE GABINETES - 98” X 55”
Usada - En Buenas CondicionesEffective
Working Size: 98″ L x 55″ H x 27″ DeepMin.
Effective Working Size: 8″ L x 10″ HAutomatic/Manual
MotorizedAdjustment
of vertical and horizontal beams(2)
1.5 HP motorsJoy-stick
for manual movementClamp
timerCondition:
Cleaned/Checked
Electrical:
230V, 3PH
AMXmachinery
SIERRA MULTIPLE - TRIM SAW - NEWMAN KM16
PARTE:
12559 - SIERRA MULTIPLE - TRIM SAW - NEWMAN KM16
USADA – BUENAS CONDICIONESElectrical: 208-230/460v, 60hz, 3phSawblade Diameter: 18” approx.Max Cutting Thickness: 5” approx.Max Workpiece Length: 18ft approx.5-Head MachineEach head is equipped with dedicated 7.5hp motor.Each head is equipped with a dedicated chain deck feeders with guide dogs for squaring up and feeding wood to the saw heads.Equipped with (2) integrated 12” wide outfeed conveyors.