Identificador: 81
Abierta
ID de articulo : # 81 se ha agregado a su lista de deseos.
Descripción
PARTE # EV-4270 - LAMINATE RACK - EVANS 4270
Pneumatic Laminate Rack
- 100 PSI Required
- Max 80 sheets 5’ X 12’ standard grade laminate.
- Dual level storage area
- Crated weight 1640 LBS. Shipping dimensions 81” long X 60” wide X 82” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
RESACADORA DOBLE – 48” CAPACIDAD LARGO
PARTE: 2FA-2NX-48 – RESACADORA DOBLE
– 48” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 4,000 RESAQUES/HRStandard FeaturesAdjustable
Notch up to 3"Variable
SpeedAlmost Unlimited Capacity Machine
SpecsDimensionsLength:
Model Dimensions 24"Width:
73"Height:
56"Infeed
Height: 40" PowerCutter
Head Motors: 20HP 208/230/480/3/60 TEFCInfeed
Motor:1-1/2 HP 208/230/480/3/60 TEFCVFD:
For lnfeed Motor Variable SpeedCompletely
Pre-Wired Motor Starter with Start/Stop Buttons and Circu...
AMXmachinery
PARTE: 12495 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 950
PARTE: 12495 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 950
USADA – MUY BUENAS CONDICIONES
WEINIG RONDAMAT R-950
MFG: 1999
230V, 3 FASES, 60 HZ
PESO 1200
LBS1 FLECHA INCLUIDA
DE 1.5” DIAMETRO
Magnetic
on/off control
Cleaned,
checked
AMXmachinery
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHO
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHOUSADA - MUY BUENAS CONDICIONES
8" hight
max cut
Variable speed travel
90" cut at 90 degrees
carriage travels on heavy rails
was used to cut styrofoam panels
can be used to call all kinds of materials by changing the blade
Dimensions 168L x 48W x 79 HighMade
in the USA
It
typically designed to cut structurally insulated panels but you could pretty
much cut any material.
It
is desig...
AMXmachinery
PARTE: 12506 – CENTRO DE MAQUINADO VERTICAL – CNC – HASS VF-6/50
PARTE: 12506 – CENTRO DE MAQUINADO VERTICAL –
CNC – HASS VF-6/50
USADO – BUENAS CONDICIONES
2015
HAAS VF-6/50 &
HRT310
Type: Vertical
Machining Centers
Category: Machining
Manufacturer: HAAS
Model: VF-6/50
Year: 2015
Description
HRT310 Rotary Table,
4th Axis Driving & Wiring, 8" Column Riser, Renishaw Probing,
Through-Spindle Coolant, CAT50 Taper, only 1,500 Spindle Hours. This 2015 Haas
VF-6/50 & HRT310 are in plant, under power and available i...