Identificador: 838
Abierta
ID de articulo : # 838 se ha agregado a su lista de deseos.
Descripción
PARTE # 11904 – LIMPIADORA DE TABLAS PARA TARIMAS – FROEDGE 450
Good condition
Electric 230 volt, 60 cycle, 3 phase
Used to clean dust of resawn boards prior to pallet assembly.
Working dimensions: Up to 8" wide, up to 6" thick and up to 8' in length.
Infeed: Infeed belt conveyor 6" wide.
Powered brushes to clean the boards top and bottom.
Powered by 5 HP motor.
Shipping 8 (length) x 5 (width) x 5 (height)
Weight 1800 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachinery
CEPILLO 12.5" PORTATIL
PARTE # SIL-DC-CM12.5-B - CEPILLO 12.5" PORTATILMOTOR: 2 HP, 110V, 60 Hz, 1 FASECAPACIDAD DE CORTE: 12.5" X 6"MAX. PROFUNDIDAD DE CORTE: 12.5" X 1.2MM, 3.2 MM X 5"VELOCIDAD DE CABEZAL: 6500 RPMCORTES POR MINUTO: 13,000CANTIDAD DE CUCHILLAS: 2 PIEZAS (DOBLE FILO)PESO: 34 KGSTIPO DE EMPAQUE: 1 CAJA
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...
AMXmachinery
BASTONERA – MOTOR 15 HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
PARTE: 12229 – BASTONERA – MOTOR 15
HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
USADA
– MUY BUENAS CONDICIONES
LARGOS MINIMOS: 16”
VELOCIDAD VARIABLE: 75 A 250 PIES LINELES POR MINUTOS
MOTOR PRINCIPAL: 15 HP, 3,600 A 5,000 RPM
MOTOR ALIMENTADOR: 5 HP
TAMANO MAQUINA: 42” W X 48” L X 46” H
TAMANO MAQUINA CON HOPPER: 42” W X 88” L X 46” H
PESO: 3,000 LBS
VARIOS RODILLOS DE ENTRADA Y SALIDA
VARIOS DIAMETROS DE CABEZALES
VARIOS JUEGOS ...