Identificador: 856
Abierta
ID de articulo : # 856 se ha agregado a su lista de deseos.
Descripción
PARTE # 11543 - SIERRA CINTA - MZ-PROJECT UNIDUE 013
EN BUENAS CONDICIONES DE OPERACION
MEDIDAS TOTALES: 3.40 MTS LARGO X 2.70 MTS ANCHO X 2.5 MTS ALTO
MOTOR DE 10 HP, 400/690V, 3 FASES, 50 HZ
PUEDEN INSTALARSE 2 PLANTILLAS, CORTA CON LA PRIMERA PLANTILLA Y LUEGO CON LA SIGUIENTE O CORTA SOLAMENTE CON 1 PLANTILLA, CORTA PAARTES CURVAS
VIDEOS DE LA MAQUINA FUNCIONANDO DISPONIBLES
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 24”
PARTE:
12334 - CEPILLO 2 CARAS - CAPACIDAD 24”
USADO - BUENAS CONDICIONES
Standard Specifications:
- 24" x 6" work
piece capacity
- 12" min. length,
(6" min. butted) x 1/4" min. thickness
- 30 HP upper cutter head
motor, 20 HP lower head motor
- Whisper helical carbide
cutterhead, (1/2" max. depth of cut)
- 1 HP platen/thickness
elevator motor
- 5 HP variable speed feed
motor, (25 to 100 ft/min. feed speed)
- 2" concentric
chipbreakers with pressure rollers
...
AMXmachinery
MESA ARMADORA BASTIDORES - 4 X 8 PIES
PARTE: 2RT-R275E/A - MESA ARMADORA BASTIDORES - 4 X 8 PIES4’x8’ Assembly TableClamp Arm with (3) Hold Down Cylinders(4) Universal Clamping Cylinders and Manifold45 Degree Vertical EaselSquaring Bars on Right and Left SidesPerforated Steel Table TopManifold with 1/4″ NPT Regulator/GageDesigned and Manufactured in the USAAdditional options for this machine include:R275A – Additional Beam AssemblyU300E05 – Additional Clamp Cylinder
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 3025
PARTE: 12126 - ROUTER PIN INVERTIDO - CR ONSRUD 3025
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
5 HP motor, belt driven to spindle
20,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
24" x 36" acrylic topped table
30" throat depth
Three position adjustable depth stop
1/2" max. chucking capacity
"Fog Mist" lubricated spindle system
Automatic pre-lubrication of spindle bearings (each...
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...