Identificador: 929
Abierta
ID de articulo : # 929 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 12030 – ENCHAPADORA CEHISA - EP-8
Usada – Buenas condiciones
Model: EP-8
Serial #: 2807
Approx. Shipping Weight: 2,500 Lbs.
Approx. Shipping Dimensions: 132″ L x 60″ W x 72″ H
Specifications:
Edgeband Thickness Max.: 3/16″ Solid Wood
Coil Cutoff Max.: 2.5mm PVC
Panel Length Min.: 5″
Panel Width Min.: 3″
Panel Thickness Min.: 3/8″
Panel Thickness Max.: 2″
Feed Speed: 33 FPM
Feed Motor: 1HP
Pressure Section: 1 Motorized Roller
End Trim Unit: 1/3HP
Tooling Speed: 12000 RPM
Straight Cut Max.: 3/16″ x 2-1/4″
Top & Bottom Trim Station: 3/4HP
Tilting Range: 0 – 20å¡
Machine Length: 10.5′
Machine Width: 56″ to 80″ (Depending on outrigger position)
Working Height: 32-1/2″
Total Height: 57″
Electrical: 220V/3PH
Equipped With:
Pressure Roller, Automatic Roll Cutter & Strip Feed Magazine, Standard Guillotine, Quickmelt Glue Pot, End Trim Unit, Top & Bottom Trim Unit, Top & Bottom Buffing Station
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12447 - CEPILLO 2 LADOS - 15” ANCHO - 3 HP Y 5 HP
PARTE: 12447 - CEPILLO 2 LADOS - 15” ANCHO - 3 HP Y 5
HP
USADO
- BUENAS CONDICIONES
6
pulgadas altura
Motor
3 y 5 HP
Marca
Jurado
AMXmachinery
REASERRADORA – 1 BANDA – SMITH
PARTE: 12275 - REASERRADORA – 1 BANDA –
SMITH
USADA – BUENAS CONDICIONES15 HP Motor1.5
HP Feed Motor
No
return included
AMXmachinery
SARGENTOS - ESTANDARD - 3.5” ALTURA - 36” CAPACIDAD
PARTE:
2JT-812-B-M1-3.5J-36L-H-C - SARGENTOS - ESTANDARD - 3.5” ALTURA - 36” CAPACIDAD
Nuevo con garantía
-500x500.jpg)
AMXmachinery
PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
PARTE:
4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
Nueva con garantía
Demo
model with about 30 hours on it
Specifications
-
Comes with digital readouts on the vertical and horizontal axis, readout in
decimal inches or mm
-
Processing sheets both horizontally and vertically
-
Cutting height is 2100mm
-
Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”
-
Weight 2400 lbs
-
Thickness of cut i...