AMX Machinery / AMX Maquinaria
Maquinaria para Madera, Metal e Industrial
Carpinterias, Fabricas de Muebles, Forestal, Tarimas, Aserraderos
Herramenta de Corte, Herramientas Electricas y Neumaticas, Refacciones
Para Precios y Existencias, contáctenos en: info@AMXmachinery.com info@AMXmaquinaria.com
Listados destacados
-500x500.jpg)
AMXmachinery
LIJADORA DE BANDA ANCHA – 37” ANCHO – 2 BANDAS
PARTE: 2EX- XS-2E37 - LIJADORA DE BANDA ANCHA – 37”
ANCHO – 2 BANDAS
NUEVA CON GARANTIA
230/460 Volt
Factory Wired 230 Volt
The Excess
Series is unmatched in quality, performance, and value by any manufacturer, foreign or
domestic. The Excess Series provides heavy-duty construction, quality design
and engineering,
and an excessive number of features that we provide in every
machine.
And to top
it off all of our electrical controls, pneumatic controls, photo electrics,...
-500x500.jpg)
AMXmachinery
CEPILLO 2 CARAS 16", 24"
PARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HPPARTE # 3GO-GT-610B - CEPILLO 2 CARAS – CAPACIDAD 24” ANCHO – MOTOR 15, 10, 2, ½ HPPARTE # 3GO-GT-610A - CEPILLO 2 CARAS – CAPACIDAD 24" ANCHO – MOTOR 20, 15, 3, ½ HPESPECIFICACIONESPARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HPMotor: 10hp,7.5hp,2hp,1/2hpMaximum width of cut: 405MM Minimum thickness of cut...
-500x500.jpg)
AMXmachinery
SIERRA DE MESA 12"
PARTE # SIL-DC-MBS300-1 - SIERRA DE MESA 12" - MOTOR 5 HP - 1 FASEPARTE # SIL-DC-MBS300-3 - SIERRA DE MESA 12" - MOTOR 5 HP - 3 FASEMOTOR: 5 HP, 220V, 60 Hz, 1 o 3 FASESDIAMETRO DEL DISCO 12"CAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 4"CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2-3/4"DIAMETRO FLECHA: 1"VELOCIDAD DEL DISCO: 4000 RPMMEDIDAS DE LA MESA: 48" X 30"ALTURA MESA: 34"MAXIMO CORTE A LA DERECHA DEL DISCO: 38"PESO: 320 KGSTIPO DE EMPAQUE: 2 CAJAS
AMXmachinery
ROUTER DE PEDESTAL – 10 HP – GARGANTA 29-1/2”
PARTE: 2NC-NT750-10 - ROUTER DE PEDESTAL – 10 HP – GARGANTA
29-1/2”
Nuevo con garantía
10 HP spindle drive motor
Chuck to tabletop maximum:
7-1/2"
Throat clearance: 750mm
(29-1/2'')
2 Speed Spindle: 8,100 /
16,300 RPM
Spindle travel: 95mm (3-3/4)
Depth stops: 6 position
turret stops, adjustable
Table travel: 190mm (7-1/2'')
Table surface area: 915mm x
101mm (36" x 40")
Table tilt: 45 degree front
downward tilt
Micrometric table raise:
1/32" (1mm) p...
AMXmachinery
ENCHAPADORA DE CANTOS – 220V, 2 FASES
PARTE: 2MK-CBC.T – ENCHAPADORA DE
CANTOS – 220V, 2 FASES
Nueva con garantíaFRONT/REAR TRIMMINGTOP/BOTTOM TRIMMING
BUFFING UNIT
This
machine is a master piece of engineering, packet with features that will make
your job easier giving you a product finish like never before. Super steady and
stable the CBC.T platform is a stainless steel mono-block base. All operating
units are easy to be accessed through the upper protection hood.
The
friction-free worktable feed panels ...
AMXmachinery
PARTE: 1SL-DC-WS300 - TROMPO - MOTOR 2-1/2 HP - CON FLECHA DE 1/2", 3/4" Y 1"
PARTE: 1SL-DC-WS300 - TROMPO - MOTOR 2-1/2 HP - CON FLECHA DE 1/2", 3/4" Y 1"NUEVO CON GARANTIAMOTOR: 2-1/2" HP, 220V, 60Hz, 1 FASESALTURA MAXIMA DEL CORTADOR: 2-1/2"DIAMETRO MAXIMO DEL CORTADOR: 6-3/4"MEDIDA DE LA FLECHA: 1/2", 3/4 Y 1"CARRERA DE LA FLECHA: 3"MEDIDA DE LA MESA: 28" X 30"ALTURA DE LA MESA: 34"VELOCIDAD DE LA FLECHA: 2BOQUILLA PARA USAR BROCAS: 1/4" Y 1/2"PESO: 155 KGSEMPAQUE 1 CAJA
AMXmachinery
PARTE: 1AM-1250 – RESACADORA PARA TARIMAS – DOBLE RESAQUE - 2 MOTORES 10 HP
PARTE:
1AM-1250 – RESACADORA PARA TARIMAS – DOBLE RESAQUE - 2 MOTORES 10 HP - 4
CUCHILLAS
RESAQUE
9” LARGO
Nueva con garantía – 6 meses sobre defectos de fabricación
en partes mecánicas
2 Motores 10 HP, 220/440V, 3
fases - conectado a 220V
Construcción Uso Rudo
Industrial
Incluye 1 juego de cuchillas
instalado
Medidas maquina:
60” ancho x 53” fondo x 37”
alto - Peso 600 kg
153 cm ancho x 135 cm fondo x
94 cm alto - Peso 600 kgPara mas especific...
AMXmachinery
PARTE: 2EX-DC-2100 - COLECTOR DE ASERRIN CON CICLON
PARTE: 2EX-DC-203C – COLECTOR DE ASERRIN CON
CICLON – MOTOR 3 HP – 1785 CFMPARTE: 2EX-DC-250 – COLECTOR
DE ASERRIN CON CICLON – MOTOR 5 HP – 2975 CFMPARTE: 2EX-DC-275 – COLECTOR DE ASERRIN CON CICLON – MOTOR 7.5 HP – 4850 CFMPARTE: 2EX-DC-2100 – COLECTOR DE ASERRIN CON CICLON – MOTOR 10 HP – 6400 CFMNuevo con garantía1 micron filter bagsDrums not includedLow noise operationstandard 1 micron filterheavy duty dynamically balanced
impellersheavy gauge steel con...
-500x500.jpg)
AMXmachinery
PARTE: 1AM-1150 – RESACADORA PARA TARIMAS – 4 CUCHILLAS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIAL
PARTE: 1AM-1150 – RESACADORA PARA TARIMAS – 4
CUCHILLAS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIALNueva con garantía – 6 meses
sobre defectos de fabricación en partes mecánicasMotor 10 HP, 220/440V, 3 fases, conectado
a 220V
Resaque máximo 9” largo x 2-1/2”
alto x 1-5/8” profundidad400 a 800 cortes/hr aprox.Largo de palos mínimo 30”, no
máximoCabezal con 4 cuchillas rectas de HSS acero de alta velocidadCabezal y Cuchillas de
Importación – La más Alta Calidad
...
AMXmachinery
ENCHAPADORA DE CANTOS PORTABLE - CON CALDERIN - RECTOS
PARTE:
2MK-CBC.E - ENCHAPADORA DE CANTOS PORTABLE - CON CALDERIN - RECTOSPARA CINTAS DE PVC, ABS, PAPEL Y CHAPAPARA PIEZAS RECTASESPESOR CINTA: 0.3 MM A 2 MM ANCHO CINTA: 80 MMCORTADOR MANUALCONTROL DE TEMPERATURA DIGITALENERGIA: 1500W, 1 FASEMEDIDAS DE ENVIO: 82 cm largo x 54 cm ancho x 48 cm alto, Peso 61 kg
AMXmachinery
PARTE: 1AM-2016 - SIERRA PENDULO – MOTOR 5 HP, 220V, 3 FASES - DISCO CORTADOR 16"
PARTE: 1AM-2016 - SIERRA PENDULO –
MOTOR 5 HP, 220V, 3 FASES - DISCO CORTADOR 16"NUEVA CON GARANTIADISCO 16" DIAMETROMOTOR 5 HP, 220V, 3 FASES, 3,500 RPM2 MESAS DE TRABAJO LATERALES CON RODILLOS DE 120 CM LARGO C/U1 TOPE AJUSTABLE PARA PONER MEDIDA DE CORTE A LARGO EN CUALQUIERA DE LAS 2 MESAS LATERALESMEDIDAS DE CORTE:MAXIMO LARGO: 12”MAXIMO ALTO: 5”DANDOLE LA VUELTA AL TABLON CABE HASTA 6-1/2” DE ALTO CON CORTES PARCIALESMEDIDA ENVIO PENDULO: 60 CM ANCHO X 110 CM LARGO X 220 CM ALTO -...
AMXmachinery
PRENSA CALIENTE – 5 SECCIONES – 160 TON
PARTE: 3UD-HP48X160T-5 –
PRENSA CALIENTE – 5 SECCIONES – 160 TON – AMX MACHINERY
Nueva con garantía
$ 34,500 USD IVA – Flete incluido a las principales
ciudades de México – 26 Mar 2020
Maximum
pressure 160T
Number
of working layers 5
Number
and specifications of plates 6-42 x 2500 x 1300mm
Spacing
of hot press plate 100mm
Oil
cylinder 100 x 10pcs
Hydraulic
motor power 5.5kw
Heat
pump power 2.2kw
Heating
pipe power 60kw
Dimensions
3500 x...
AMXmachinery
PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHO
PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHONuevo con garantíaFeatures:Powered pneumatic upper & lower pressure rollers for through feeding and precise cutting.Precision ground cast iron table for durability.Rigidly mounted alloy steel spindle provides accurate vibration-free power transfer.Heavy-duty sheet metal frame.Heavy-duty alloy spindle for durability & run out free performance.Spindle height adjustment by precision rack & pinion gears.Magnetic overload switch fo...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MRIs an entry-level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system which can either...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush trimming, PVC scrapi...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX340M Is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the i...
-500x500.png)
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
-500x500.png)
AMXmachinery1
ABRAZADERA PARA ARMADORA DE CAJONES
ABRAZADERA PARA ARMADORA DE CAJONES PARTE: 2CK-DWMOffers the rugged construction and ease of set-up of high production machines at a fraction of the price. Quickly clamp your drawer boxes precisely and square ever time.Quick setting drawer box clampStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various draw...