Identificador: 16 Abierta

ARMADORA DE CAJONES

AMXmachinery

Contacte al Vendedor

Descripción

PARTE # 2RT-R885 - ARMADORA DE CAJONES

14″ x 24″ x 36″ Capacity

Pneumatic Controls

(2) 4″ Bore Clamping Cylinder

Box Alignment Stops

Operator Control Panel

40″ X 72″ Floor Area Required

Designed And Manufactured In The United States

Pago y Devoluciones

Forma de pago: Visa/Mastercard/American Express, Transferencia/Deposito Bancario

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50

PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50 USADA – MUY BUENAS CONDICIONESVoltage: 440/3/60Year: 2013 4" x 12" wide max. board capacity 14` material capacity infeed & 8` outfeed table Loading bars attached to front of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor, 197 FPM max. feed speed; Servo controlled pusher arm travels full length of board, measures, positions and feeds board into saw; capable of single-piece & pack...

AMXmachinery

PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6

PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H