Identificador: 1830
Abierta
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2TA-WG-2630 - ASTILLADORA - 26 PULGADAS
Features:
- A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cobs, etc.
- Excellent wearing ability and impact-resistant for time & labor saving.
- Large busting capacity and easy feeding system.
- The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.
- Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of waste.
- Movable screen for changing the size of chips and easy to clean-up.
- Energy efficient & quiet running industrial motor.
|
SPECIFICATIONS |
WG-2630 |
WG-4150 |
|
Entrance Capacity (L x W) |
26" x 12" |
41" x 12" |
|
Rotary Cutter |
6 sets |
12 sets |
|
Stationary Cutter |
4 sets |
|
|
Busting Capacity at 1/2" Chips |
1300 ~ 2600 (LBS/ Hour) |
1300 ~ 4000 (LBS/ Hour) |
|
Finish Chip Size |
3/4" (or other size) |
|
|
Main Motor |
30 HP |
50 HP |
|
Machine Sizes (L x W x H) |
82" x 52" x 79" |
90" x 70" x 98" |
|
N.W. |
3800 LBS |
6600 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TORNO 14'' X 40''
TORNO 14'' X 40'' PARTE: 2GM-1440BGF-3ISO 9001 certifiedLifetime Tech Support by phone and videoFull Geared-head precision Metal Lathe with foot brakeQuick-change gearbox with fast and easy threading set up3 HP heavy duty main motor runs on 220V Single-Phase power1.5” Spindle boreSpindle Nose D1-4 CamlockHeavy Duty guideway; 7.5” width8 spindle speeds ranging from 70-2,000 RPM56 kinds of imperial threads44 kinds of metric threadsSpindle is balanced, ...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 5' X 12GA
DOBLADORA DE METAL 5' X 12GA PARTE: 2GM-0512EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...
-500x500.png)
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL03Is a cutting-edge fully automatic finger jointing production line, designed to efficiently convert wood waste into valuable materials while maintaining an excellent performance-to-cost ratio. With its innovative technology, this system offers remarkable value in terms of both performance and price, the entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line i...
-500x500.png)
AMXmachinery1
TORNO 16'' X 60''
TORNO 16'' X 60'' PARTE: 2GM-GML-1660HD16” x 60”, 2-1/16” bore, 6 HPISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece solid cast iron machine baseHeavy Duty guideway width 10-1/4”Heavy Duty main motor 6 HP16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm45 kinds of inch threads, and 39 kinds of metric threadsThreading and feeding rate change without ch...