Identificador: 2569
Abierta
ID de articulo : # 2569 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2GM-HS-0410E - CORTADORA DE METAL HIDRAULICA
- ISO 9001 certified
- Taiwan machines
- 24” German SIKO Front Operated power back gauge w/ micro adjustment 0.004” , inch/mm digital display
- Quick Change Blade Gap Adjustment (BGA), with gap dial
- CE standard “OMERO” electric control system
- Meet OSHA safety standard code
- Shadow line for accurate straight cutting
- Adjustable cutting length and stroke
- Ball transfer plates on worktable for easy loading workpiece
- Well balanced and sturdy all steel machine frame
- German made Hydraulic logic system centrally located and quiet
- Hydraulic hold-downs with anti-mar neoprene
- Shear blades are high grade carbon/chrome alloy steel and hardened to 60 HRC, 2-edge indexable upper blade and 2-edge indexable bottom blade
- Full length viewable safety finger guard to protect operator from cutting hazard
- Removable safety foot pedal, automatic blade raise up on removal of foot from pedal
- Hydraulic, electrical overload protection
- Compact operator control panel
- All motors are overload protected & low voltage control system
- Jog or continuous auto cycle cutting operation modes
- 24” German SIKO Front Operated Power Back Gauge with micro adjustment , accuracy 0.004” inch/metric digital display.
- 1 each 60” squaring arm with inlaid inch/metric dual scale
- Quick change blade gap adjustment (BGA) with gap dial
- Shadow line for accurate straight cutting
- Material support and drop back chuter
- Upper and bottom blade set with 2-edge on bottom & 2-edge on upper
- 2 each 24” front support arms
- Hydraulic hold-downs with anti-mar neoprene
- Full length viewable finger guard
- Removable safety foot pedal
- Tool box
Cutting capacity: Mild Steel: Stainless Steel: soft aluminum: min. thickness
|
4'x 10 Ga. 4' x 14 Ga. 1/4" 20GA |
| Blade Length: | 4'4" |
| Strokes per Minute: | 12-20 |
| Worktable Height: | 34 1/2" |
| Front Support Arm: | 24" |
Back Gauge (German SIKO): | 24" Powered B.G. |
| Blade Rake Angle: | 2 degrees |
| Oil Tank Capacity: | 17 Gallons |
Main Motor:
Powered B.G. Motor | 7-1/2 HP | 3 Phase | 220V/30A (Optional: 440V/15A | 3 Phase) 3/4 HP | 220v/440v | 3 Phase |
| Machine Weight: | 5,150 LBS |
| Machine Dimensions: | 74" x 86" x 63" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS MODULAR - 10 HP
PARTE: 2EX- DC-3100 - COLECTOR DE POLVOS MODULAR - 10 HPIs powered by a 10 horsepower motor and comes equipped with 3 1-micron filter bags. It features a 99 square foot filter area with 36 cubic feet of storage capacity measuring 112 inches tall by 110 inches wide by 32 inches deep. This three-phase dust collector has 27 amps at 220 volts. Modular ring design enables increased storage and filter capacity. Magnetic starter included. Please refer to the comparison chart below for specification...
-500x500.png)
AMXmachinery1
TALADRO LINEAL - 23 HUSILLOS
PARTE: 2RI-R19F - TALADRO LINEAL - 23 HUSILLOSDescription:Is the mid level model in the line boring drills that Ritter Machinery has to offer. Is both affordable and built to last. Is a multi-spindle drill used for adjustable shelving. No more using templates that wear out quickly and lose accuracy. Is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with indexing pins on both the left and right hand side of the machine. The rear fenc...
-500x500.jpg)
AMXmachinery1
SIERRA CINTA PARA METAL - DOBLE COLUMNA
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMax. Cutting Capacity(mm): Round:300mm, sqaur...
-500x500.png)
AMXmachinery1
ESPIGADORA Y MORTAJADORA
PARTE: 2PI-M45 - ESPIGADORA Y MORTAJADORAIs our entry level miter, mortise, and tenon machine. One of our most popular wood cnc machines that features side pressure clamps to ensure the part is firmly against the side fence prior to clamping. This guarantees a perfect 45˚ miter every time. Will produce 150-175 doors per shift.Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.The ability to cut MDF paper or vinyl wrapped profiles.Eli...