Identificador: 3059
Abierta
.PNG)
.PNG)
Descripción
PARTE: 3HO-HT450YF - CANTEADORA AUTOMATICA
| Banding Tape Thickness | 0.3-3mm |
| Banding Tape Width | 12-65mm |
| Workpiece Thickness | 10-60mm |
| Workpiece Length | >=80mm |
| Workpiece Width | >=60mm |
| Feeding Speed | 18/20/22mmin |
| Heating Power | 1.8kw |
| Pre-milling Motor Power | 2.2kw x2 |
| Feeding Motor Power | 3.7kw |
| Glue Spreading Motor Power | 0.75kw |
| End Trimming Motor Power | 0.37kw x 2 |
| Rough Trimming Motor Power | 0.75kw x 2 |
| Fine Trimming Motor Power | 0.75kw x 2 |
| Corner Rounding Motor Power | 0.37kw x 2 |
| Polishing Motor Power | 0.18kw x 2 |
| Workpiece Pressing Beam Lifting Motor Power | 0.37kw |
| Air Pressure | 0.8-1Mpa |
| Overall Dimension | 6700×850×1450mm |
| N.W. | 2700kgs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA VERTICAL - 74" ALTO X 64" ANCHO
PARTE: 2SS-C5 - SIERRA VERTICAL - 74" ALTO X 64" ANCHOThe portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. Photos are shown with a stand and wheels, which are optional accessories.Motor Horsepower, Amperage and Volts3.25 HP, 15 amp, 120 Volt3.25 HP, 7.5 amp, 220 VoltStandard EquipmentZinc plated 1 ¾” steel guide tubes.Milwaukee Tool motor4 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to horizo...
AMXmachinery1
SIERRA VERTICAL - 64" ALTO X 120" ANCHO
PARTE: 2SS-7000 - SIERRA VERTICAL - 64" ALTO X 120" ANCHOHeavy duty induction motors allow for cutting all day with an option of single or three phase power. All of our machines are built to last; gives you that extra motor efficiency with little to no maintenance required. Longevity is made possible by high induction motors supported by US precision machined components.The Panel Saw cuts horizontally and vertically, within .015” straight and square, and has a maximum panel thickness of 2”...
AMXmachinery1
LIJADORA DE CANTOS
PARTE: 2PI-220 - LIJADORA DE CANTOSfeatures two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.designed for flexible brushes2 upper and lower sanding headstable moves up and down, allowing the user to sand certa...
-500x500.png)
AMXmachinery1
MESA DE MONTAJE - MARCO FRONTAL ABIERTO
PARTE: 2RI-R210E/A - MESA DE MONTAJE - MARCO FRONTAL ABIERTOScrewed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No...