Identificador: 2916
Abierta
ID de articulo : # 2916 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 2PI-HP5D - ESPIGADORA HORIZONTAL
Is designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.
Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the center section of the inside edge of the door stile and the entire inside edge of the door rail material.
- Quick, accurate assembly of TFL doors.
- Elimination of complicated machine setup.
- Perform multiple machining operations on one machine reducing the amount of time the part is being transferred.
- Gain production times on CNC routers and Point to Points by shifting boring, doweling and grooving
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ESCOPLO HORIZONTAL - OSCILANTE - 2 MESAS
PARTE: 2CK-SW-02 - ESCOPLO HORIZONTAL - OSCILANTE - 2 MESAS Is a dual table mortising machine capable of producing horizontal or bevel mortises up to 4.72” long x 1.18” high x 3.15” deep. The dual table setup permits two operators to work simultaneously for higher throughput and increased productivity. The mortise size is adjustable to your needs and the tables can be adjusted in height to easily locate the mortise precisely for tight and flush joints. A pneumatic clamp holds the work...
AMXmachinery1
SIERRA RAJADORA - 1 DISCO - 14"
PARTE: 2EX-XR-14BX - SIERRA RAJADORA - 1 DISCO - 14"Details:15 HP Main motorHuge 45″ x 61″ table available6 full hold down rollersVariable feed speeds from 50-120 ft/min8′ Guaranteed Glue LineDisc BrakesMicro adjust fence with handwheelTriple anti-kickback fingers18″ wide ripping capacityAutomatic Oiler with low-oil warningWye-Delta soft startHeat treated chain and raceAmp meterSquare D Electrical controlsSpecifications:Horsepower: 15HPVoltage: 230V or 460VPhase(s): 3PHBlade Size: 14"Ma...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 12GA
PARTE: 2GM-0412E - DOBLADORA DE METAL 4' X 12GA This machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is ...
AMXmachinery1
ALIMENTADOR - 2048
PARTE: 2JG-STEFF-2048 - ALIMENTADOR 20484) Rollers and (8) speeds of 6-13-18-21-36-42-54-102 FPM0.7/1 HP motor4-3/4" roller diameter2-1/4" roller widthComplete with universal support columnWeight: 163 lbs.