Identificador: 3059
Abierta
ID de articulo : # 3059 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 3HO-HT450YF - CANTEADORA AUTOMATICA
| Banding Tape Thickness | 0.3-3mm |
| Banding Tape Width | 12-65mm |
| Workpiece Thickness | 10-60mm |
| Workpiece Length | >=80mm |
| Workpiece Width | >=60mm |
| Feeding Speed | 18/20/22mmin |
| Heating Power | 1.8kw |
| Pre-milling Motor Power | 2.2kw x2 |
| Feeding Motor Power | 3.7kw |
| Glue Spreading Motor Power | 0.75kw |
| End Trimming Motor Power | 0.37kw x 2 |
| Rough Trimming Motor Power | 0.75kw x 2 |
| Fine Trimming Motor Power | 0.75kw x 2 |
| Corner Rounding Motor Power | 0.37kw x 2 |
| Polishing Motor Power | 0.18kw x 2 |
| Workpiece Pressing Beam Lifting Motor Power | 0.37kw |
| Air Pressure | 0.8-1Mpa |
| Overall Dimension | 6700×850×1450mm |
| N.W. | 2700kgs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE - 4 RUEDAS - STAND INTELIGENTE
PARTE: 2CK-DS400Is safe on consistent feeding unit for shaper, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job, Includes the SS03 Heavy Duty Smart Stand which features an extra-long support column and extension arm which allows for use ...
-500x500.png)
AMXmachinery1
ARMADORA DE PUERTAS
PARTE: 2RI-R450V - ARMADORA DE PUERTASIs designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assem...
-500x500.png)
AMXmachinery1
PARTE: 2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
PARTE:
2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEKHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly...
-500x500.png)
AMXmachinery1
TORNO 20'' x 80''
TORNO 20'' x 80'' PARTE: 2GM-GML-2080Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.ISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore ...