Identificador: 2224
Abierta
Descripción
PARTE: 12508 - CENTRO DE MAQUINADO VERTICAL – CNC – HAAS EC-550
USADO – BUENAS CONDICIONES
2008 HAAS EC-550
FULL 4TH AXIS, 10,000 RPM SPINDLE
THRU SPINDLE COOLANT, RENISHAW PROBING
CAT 50, 72 TOOL POSITIONS
IN PLANT, UNDER POWER, AVAILABLE IMMEDIATELY
Specifications:
PALLET WIDTH 21.6"
PALLET LENGTH 21.6"
PALLET INDEXING FULL 4TH
X-AXIS TRAVEL 30"
Y-AXIS TRAVEL 34"
Z-AXIS TRAVEL 32"
SPINDLE SPEED 10,000 RPM
SPINDLE MOTOR 45 hp
SPINDLE TAPER CAT 50
TOOL POSITIONS (ATC) 72
Equipped With:
FULL 4TH AXIS
HIGH-PRESSURE THROUGH-SPINDLE COOLANT (1,000 PSI)
RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS)
72-POSITION TOOL CHANGER
10,000 RPM SPINDLE (CAT50)
CHIP CONVEYOR
REMOTE JOG HANDLE
PROGRAMMABLE COOLANT
SECOND HOME POSITION
COORDINATE ROTATION & SCALING
SPINDLE ORIENTATION
RIGID TAPPING
QUICK CODE
MACROS
USB PORT
EARLY POWER-FAILURE DETECTION MODULE
** MACHINE RUNS (1) SHIFT A DAY
** HOURS SCREEN IN THE CONTROL HAS BEEN RESET (SEE PHOTO)
** FULL REPLACEMENT COST, AS EQUIPPED - $350,000
** MACHINE CUT PRIMARILY BRASS & SOME ALUMINUM AND STEEL
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
** MACHINE AVAILABLE TO BE REMOVED IN EARLY DECEMBER
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...
AMXmachinery
ENLAZADORA/COLA DE MILANO
PARTE: 2LO-JDT65 - ENLAZADORA/COLA DE MILANOIdeal for drawer production and furniture parts which require high quality dovetail joints.Max. workpiece size 59" x 16 ½"Workpieces are clamped by air clamps.Enclosed-type stand.Equipped with an indication bar for indicating cutting position.Tenon width can be micro-metrically adjusted in 2 mm.Tenon and mortise depth are conveniently adjusted according to the thickness of workpiece.Equipped with one four-sided template providing four types of pitches...
AMXmachinery
CRISTAL FLECHA B
PARTE: P-VIDRIO-1056 - CRISTAL FLECHA B - BISELADO - CON BASE DE MADERACristal ¼ espesor Base de Madera Terminada Medidas: 8.75 x 12"
AMXmachinery
SIERRA CINTA MZ PROJET
PARTE # 10447 - SIERRA CINTA - MZ PROJETEN BUENAS CONDICIONES DE OPERACIONCORTES CURVOS/FIGURAS DE PATA DE MESA Y DE SILLAMOVIEMIENTO EN LA HOJA DE CORTECARRO DE ALIMENTACION NEUMATICOMOTOR DE 7 1/2 H.PVOLANTE DE 85 CM Y 4 1/2 DE ANCHOLARGO DE BANCA DE 3.20LIMITE DE CORTE DE 1.40