Identificador: 116
Abierta
Descripción
PARTE: 2EX-DCY-1215 – COLECTOR PARA EXTERIORES – MOTOR 15 HP – 7600 CFM
PARTE: 2EX-DCY-1220 – COLECTOR PARA EXTERIORES – MOTOR 20 HP – 8800 CFM
PARTE: 2EX-DCY-1425 – COLECTOR PARA EXTERIORES – MOTOR 25 HP – 10500 CFM
Nuevos con garantia
Caracteristicas:
Powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions.
This series requires no bagging because all waste dumps from the rotary air lock, and there is no need to power down the unit while cleaning up waste.
Electronic controls must be protected from weather.
See comparison chart below for specifications.
2EX-DCY-1215 | 2EX-DCY-1220 | 2EX-DCY-1425 | |
|---|---|---|---|
Horsepower | 15 HP | 20 HP | 25 HP |
Standard Leg Set | L1 | L2/L3 | L2/L3 |
CFM | 7600 | 8800 | 10500 |
Amps @ Voltage | 37A @ 230V | 49A @ 230V | 62A @ 230V |
Dimensions | 16'-3" x 73.25" x 73.25" | 23'-11" x 153.5" x 98.5" | 25'-1" x 153.5" x 98.5" |
Opening Dimensions | 74" x 69" x 72" | 164" x 149" x 91" | 164" x 149" x 91" |
Inlet Size | 14" | 16" | 18" |
Outlet Size | 16" | 18" | 20" |
Rotary Airlock HP | 1/4 HP | 1/4 HP | 1/4 HP |
Chip Dumping Capacity | 10 CFM | 10 CFM | 10 CFM |
Drop Size | 8" x 12" | 8" x 12" | 8" x 12" |
Soft Start | Yes | Yes | Yes |
Weight | 2000 lbs | 2500 lbs | 2850 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TROMPO CON ALIMENTADOR – 5 HP - POWERMATIC
PARTE: 12285 – TROMPO CON
ALIMENTADOR – 5 HP - POWERMATICUSADO – BUENAS CONDICIONES
TS-80 / 9179083
AMXmachinery
SHAPER WITH FEEDER - MOTOR 7.5 HP - LARICK 390
PART:
12327-E - SHAPER WITH FEEDER - MOTOR 7.5 HP - LARICK 390
USED
- EXCELLENT CONDITIONS
230/460V,
3 PHASE
AMXmachinery
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHO
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHOUSADA - MUY BUENAS CONDICIONES
8" hight
max cut
Variable speed travel
90" cut at 90 degrees
carriage travels on heavy rails
was used to cut styrofoam panels
can be used to call all kinds of materials by changing the blade
Dimensions 168L x 48W x 79 HighMade
in the USA
It
typically designed to cut structurally insulated panels but you could pretty
much cut any material.
It
is desig...
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALESNUEVA CON GARANTIACARACTERISTICAS220V/60HZ/3PH1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HPFeeding motor: 3Kw – 4 HP Stepless variable fe...