Identificador: 2567
Abierta
.PNG)
Descripción
CORTADORA DE METAL HIDRAULICA 8' x 8 Ga PARTE: 2GM-HS-0808M
- ISO 9001 certified
- Taiwan machines
- HS-0808M with 24” manual back gauge
- Quick Change Blade Gap Adjustment (BGA), with gap dial
- CE standard “OMERO” electric control system
- Meet OSHA safety standard code
- Shadow line for accurate straight cutting
- Adjustable cutting length and stroke
- Ball transfer plates on worktable for easy loading workpiece
- Well balanced and sturdy all steel machine frame
- German made Hydraulic logic system centrally located and quiet
- Hydraulic hold-downs with anti-mar neoprene
- Shear blades are high grade carbon/chrome alloy steel and hardened to 60 HRC, 2-edge indexable upper blade and 2-edge indexable bottom blade
- Full length viewable safety finger guard to protect operator from cutting hazard
- Removable safety foot pedal, automatic blade raise up on removal of foot from pedal
- Hydraulic, electrical overload protection
- Compact operator control panel
- All motors are overload protected & low voltage control system
- Jog or continuous auto cycle cutting operation modes
- HS-0808M comes with 24” manual back gauge
- 1 each 60” squaring arm with inlaid inch/metric dual scale
- Quick change blade gap adjustment (BGA) with gap dial
- Shadow line for accurate straight cutting
- Material support and drop back chuter
- Upper and bottom blade set with 2-edge on bottom & 2-edge on upper
- 2 each 24” front support arms
- Hydraulic hold-downs with anti-mar neoprene
- Full length viewable finger guard
- Removable safety foot pedal
- Tool box
Cutting capacity: Mild steel Stainless steel |
8'x 8 Ga. 8' x 11 Ga. |
| Blade length | 8'2" |
| Strokes per minute | 10-15 |
| Worktable height | 34 1/2" |
| Front support arm | 24" |
Back gauge | 24" Manual Back Gauge |
| Blade rake angle | 2 degree |
| Oil tank cap. | 22 Gal |
Main Motor
Powered B.G. Motor | 10 HP, 220V/35A - 440V/18A, 3 PH,
1 HP, 220v/440v, 3 PH |
| Machine weight | 11,350 LBS |
| Machine dimensions | 157" x 76" x 65" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICA
PARTE:
2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICANueva con GarantiaIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX350M can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end tri...
AMXmachinery1
PRO-LINE CNC
PRO-LINE CNCA machine, that is particularly well suited for the door and window industry.• Up to 2 CNC processing units – mounted at the top• CNC units – right side and left side• Possibility of groove milling at out feed• Horizontal magazine – also functions as a bufferExtra• Waste Conveyer
-500x500.png)
AMXmachinery1
TORNO 20'' x 40''
TORNO 20'' x 40'' PARTE: 2GM-GML-2060Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HPISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore 3-1/8”Spindle D1-8Guideway width 12”Main motor 10HP16 spindle speeds from 25-1,800 rpm, 12 speeds4-way rapid traverse on the carriage longitudinal and cross60 kinds of inch threads, and 41 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced...
-500x500.jpg)
AMXmachinery1
LIJADORA DE BANDA VERTICAL HEAVY DUTY - 10 HP
PARTE: 2CK-OES512DIs the ideal edge sander for demanding applications for production use. Equipped with a 12” high oscillating sanding belt, it is ideal for sanding drawer boxes, doors, furniture components and more. The OES512D is also equipped with dual front and rear tables which are adjustable up & down and can be tilted to 45 degrees, allowing for a wide range of applications and full utilization of the sanding belt. The dual tables also allow for two operators to be working on the mach...