Identificador: 3045
Abierta
.PNG)
Descripción
PARTE: 2LE-005 - SISTEMA DE ENTRADA PARA SIERRAS MULTIPLES - ALIMENTADOR
Is a low-cost solution to feeding boards into your fixed or movable saw blade ripsaw.
A powered movable fence on the infeed allows you to position the board exactly where you want to rip it. This reduces the edging size.
Stock is manually placed on the infeed roll case. After a fence position has been selected the operator releases the piece and it is automatically fed into the ripsaw.
The infeed table can run stock that is down to 14” long. Consult with the saw manufacture for saw capabilities.
The infeed roll case has a variable speed controller.
The infeed table can handle both surfaced and rough stock.
(4) top hold down rolls assists the feeding of the ripsaw, with the first roll pneumatically sequencing.
The infeed rolls are canted which keeps the boards positively against the fence.
Work Piece Dimensions ( 8’ Standard version )
Length: 14” Min. (consult ripsaw manufacture) 100” Max (optional 12’ and 16’ table length)
Width : ¾” Min. 12” Max.
Thickness: 3/8” Min. 3” Max.
Feed speeds: 20- 150 FPM (Ripsaw)
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA VERTICAL - 64" ALTO X 120" ANCHO
PARTE: 2SS-6400 - SIERRA VERTICAL - 64" ALTO X 120" ANCHOProvides a 64″ maximum crosscut. The maximum ripcut (horizontal) is dependent on pushing the panel through.Standard Equipment3 Hp worm driven heavy-duty saw motor.10 ft. welded steel frame.Chrome-plated 1 3/4″ guide tubes.8 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to horizontal cutting.Thin material pressure guard.Solid aluminum material rollers.Enclosed counterweight system.I...
AMXmachinery1
MOLDURADORA – 5 CABEZALES – OMIL PLM 5
PARTE:
12351 - MOLDURADORA – 5 CABEZALES – OMIL PLM 5
USADA BUENAS CONDICIONESANCHO MAXIMO 160 MMALTO MAXIMO 90 MMLARGO MINIMO 200 MMCABEZALES 5500 RPM6 MOTORES POTENCIA TOTAL
45.5 HP
HECHA EN BRASIL
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 3/16''
PARTE: 2GM-04316E - DOBLADORA DE METAL 4' X 3/16'' This machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...
AMXmachinery1
EXTRACTOR DE POLVOS - FILTRO - 2 SECCIONES
PARTE: 2EX-DCF-218 - EXTRACTOR DE POLVOS - FILTRO - 2 SECCIONESTyphoon offers 2 sections baghouse sock filter in open or enclosed models. Both of these models have 9 1-micron, 6-inch filter socks per section with a 16 inch inlet port to fit the magnum series dust collectors. The open model should not be used in direct exposure of rain or water, while the enclosed model is for outdoor use.