Identificador: 929
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 12030 – ENCHAPADORA CEHISA - EP-8
Usada – Buenas condiciones
Model: EP-8
Serial #: 2807
Approx. Shipping Weight: 2,500 Lbs.
Approx. Shipping Dimensions: 132″ L x 60″ W x 72″ H
Specifications:
Edgeband Thickness Max.: 3/16″ Solid Wood
Coil Cutoff Max.: 2.5mm PVC
Panel Length Min.: 5″
Panel Width Min.: 3″
Panel Thickness Min.: 3/8″
Panel Thickness Max.: 2″
Feed Speed: 33 FPM
Feed Motor: 1HP
Pressure Section: 1 Motorized Roller
End Trim Unit: 1/3HP
Tooling Speed: 12000 RPM
Straight Cut Max.: 3/16″ x 2-1/4″
Top & Bottom Trim Station: 3/4HP
Tilting Range: 0 – 20å¡
Machine Length: 10.5′
Machine Width: 56″ to 80″ (Depending on outrigger position)
Working Height: 32-1/2″
Total Height: 57″
Electrical: 220V/3PH
Equipped With:
Pressure Roller, Automatic Roll Cutter & Strip Feed Magazine, Standard Guillotine, Quickmelt Glue Pot, End Trim Unit, Top & Bottom Trim Unit, Top & Bottom Buffing Station
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12173 - DOBLADORA DE TUBOS – HIDRAULICA - CAPACIDAD DIAMETRO 4-1/2”
PARTE: 12173 - DOBLADORA
DE TUBOS – HIDRAULICA - CAPACIDAD DIAMETRO 4-1/2”
Usada – Buenas
condiciones, Revisada y Checada
Capacities:
Non-ferrous tubing:
4.5" x .17" - Y.P. to 25,000 PSI
Mild steel tubing:
4.5" x .11" - Y.P. to 35,000 PSI
Stainless steel tubing:
4.5" x .065" - Y.P. to 60,000 PSI
Steel pipe: 3.5" x .24"
schedule 80
Maximum radius:
18"
Tube length over mandrel...
AMXmachinery
PARTE: 2TA-PL-18 - CEPILLO 2 CARAS 18", 24" Y 38"
PARTE: 2TA-PL-18 - CEPILLO 2 CARAS - 18" ANCHOPARTE: 2TA-PL-24 - CEPILLO 2 CARAS - 24" ANCHOPARTE: 2TA-PL-38 - CEPILLO 2 CARAS - 38" ANCHOOPCIONES:CABEZAL CON CUCHILLAS EN ESPIRALCT-SCH-14T 14MM x 14MM - NAVAJAS PARA CABEZAL EN ESPIRAL CT-SCH-15T 15MM x 15MM - NAVAJAS PARA CABEZAL EN ESPIRALFEATURES:- Upper & lower Straight Cutterheads for accurate and powerful two sided planning in one pass.- Optional Auto digital thickness control for quickly and accrue set up.- The work table surface was pre...
AMXmachinery
FORMADORA – REDUCE TUBOS – CAPACIDAD – 140 MM
PARTE:
3BE-CH-3001 - FORMADORA – REDUCE TUBOS – CAPACIDAD – 140 MM
NUEVA CON GARANTIA
Process capacity: φ50-φ140mm
Process tube length:500-3500mm
Process tube
thickness:1.5-2.5mm
Process reduction tube
length:20-120mm
Power: Hydraulic 15HP
W/ STANDARD ACCESSORIES AND
TOOL BOX
AMXmachinery
LIJADORA DE TAMBOR 25"
PARTE # 2SM-913002 - LIJADORA DE 2 TAMBORES – 25” DE ANCHO – 5 HP, 220V, 1 FASEPARTE # 2SM-913102 - LIJADORA DE 2 TAMBORES – 25” DE ANCHO – 5 HP, 220V, 3 FASESSPECIFICATIONSSanding Capacity:Maximum Width (in): 25, 37, 50Minimum Length (in): 3-1/2Maximum Thickness (in): 25″ model: 637″ & 50″ models: 12Minimum Thickness (in): 1/32Dimensions HxWxD (in):25″ model: 43 x 46 x 3137″ model: 43 x 58 x 3150″ model: 50 x 71 x 31Drum (in): (extruded aluminum)25″ model: 5 x 2537...