Identificador: 2027
Abierta
Descripción
PARTE: 2LO-GS-12ME - ENGOMADORA DE BANCO - 12" ANCHO
Nueva con garantía
- Designed for water-based woodworking glues.
- Glue is applied to the bottom edge of the stock when the stock is passed by hand across the roll.
- Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.
- The high-quality 6" diameter, 12" wide grooved rubber roll for durability usage.
- Removable stainless steel glue pan, doctor blade and glue roll assembly for quick and easy clean-up.
- Floor stand, air regulator & air hold down cylinder, Aluminum rollers extension frame & 4 aluminum rollers included on floor model GS-12TR.
- The electrical power requirement is 110 volts, single-phase.
- Other sizes available.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 1HP
PARTE: 2MK-CP/1.C - COLECTOR DE POLVOS - 1HPIs Ideal for collecting light powder from small machines, it has an adapter that can be attached to the end of the hose making it easier whenever cleaning the floor. Technical InformationMotor Specs1 HP 1 PHASE 127 V – 16 AAir Flow Capacity600 CFMBag volume60 L (2.12 ft³)Number of Inlet1Inlet Size4"Filtration1 micronBag size14" x 25" | 371mm x 635mmWeight73 Lbs
AMXmachinery1
LIJADORA DE BANDA VERTICAL - 6"
PARTE: 2CK-CT108 - LIJADORA DE BANDA VERTICAL - 6"Has a 6” x 108” long belt with 39” wide platen for straight edge sanding and 3” drum for curve sanding. Table are adjustable up and down and can be angled for full belt utilization. This is the ideal edge sander for sanding cabinet door edges, furniture components, and more.Large front table can be tilted and adjusted in height to utilize the full width of the sanding beltSide table is supplied for sanding curved components and can be ...
-500x500.png)
AMXmachinery1
HORNO DE AIRE CALIENTE
PARTE: 12739 - HORNO DE AIRE CALIENTE Tested and works as it should.208V OnlyDrive bar roller styleConveyor is 69" Long
-500x500.png)
AMXmachinery1
CENTRO DE CORTE PARA TABLONES
PARTE: 4ST-US800 - CENTRO DE CORTE PARA TABLONESAUTOMATIC BEAM PROCESSING CENTRECOMPOUND CUTTING FOR LARGE SECTIONSIs the cutting centre for large-section beams, making it the optimal solution in carpentry and timber frame construction.Thanks to an electronically controlled 5-axis technology, it satisfies all straight, tilting and compound cutting requirements.It guarantees maximum processing speed and finished product quality, reducing labour and maximising production.Can process beams of any l...