Identificador: 2841
Abierta
ID de articulo : # 2841 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2MK-CP/1.C - COLECTOR DE POLVOS - 1HP
Is Ideal for collecting light powder from small machines, it has an adapter that can be attached to the end of the hose making it easier whenever cleaning the floor.
| Technical Information | |
|---|---|
| Motor Specs | 1 HP 1 PHASE 127 V – 16 A |
| Air Flow Capacity | 600 CFM |
| Bag volume | 60 L (2.12 ft³) |
| Number of Inlet | 1 |
| Inlet Size | 4" |
| Filtration | 1 micron |
| Bag size | 14" x 25" | 371mm x 635mm |
| Weight | 73 Lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
EXTRACTOR DE POLVOS - 15 HP
PARTE: 2EX-DB-150 - EXTRACTOR DE POLVOS - 15 HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specif...
-500x500.png)
AMXmachinery1
CEPILLO DE ALAMBRE - 2 CABEZAS
PARTE: 2CK-BS600-2H - CEPILLO DE ALAMBRE - 2 CABEZASProduce distressed wire brush flooring and paneling with ease!Is designed to remove the soft grain between the growth rings to produce distressed wood flooring, paneling, and more. Following the wire brush head is a nylon brush that is designed to remove any raised fibers that appear from the wire brushing. With variable frequency inverters to control the brush RPM and feed speed you have ultimate control over your finished aesthetic.Ergonomi...
-500x500.png)
AMXmachinery1
TALADRO LINEAL CNC - 76 HUSILLOS
PARTE: 2RI-R76 - TALADRO LINEAL CNC - 76 HUSILLOSDescription:A closet system drill part of the panel master series. Is a CNC single row system drill with programmable drill row location and boring depth. Is used for drilling full length closet panels in a single process. The drill row ball screws and linear rails provide for precision drill row location. The servo driven ball screw table feed control allows for precision drill depth control and through feed boring. The multiple spindles and ...
-500x500.png)
AMXmachinery1
ESPIGADORA Y MORTAJADORA
PARTE: 2PI-MMTJ - ESPIGADORA Y MORTAJADORAIs a full 3 Axis CNC machining center used for producing high quality miter joints used in cabinet door manufacturing. This machine produces between 200-275 doors per 8-hour shift with one operator.Smaller Footprint: 30% Less Floor Space25% More Powerful40% More Clearance To Load Short PartsEfficient ManeuverabilityFront Access Control PanelExtra Safety GuardingRear Machine Enclosure As A StandardSwivel TouchscreenTable Plates Swivel To 90 DegreesLED Li...