ID: 2020
Open
.jpg)
.jpg)
.jpg)
Description
PARTE: 12416 – ESPIGADORA DOBLE DE CADENA - FRIULMAC
USADA - BUENAS CONDICIONES
Model Contouramat
The ideal solution for double-end trimming and coping, with only one operator required!
Working Length: 115 - 1500mm (4.52" - 59")
Working Width: 30mm - 250mm (1.18" - 9.84")
Working Thickness: 12mm - 50mm (0.47" - 1.96")
Configuration: Double-End Trim & Double-End Cope/Profiling
Left & Right Trim Motors: 4 HP Each
Trim Blade Diameter: 125mm - 180mm
Trim Blade Bore: 30mm
Left & Right Cope/Profiling Motors: 7.4 HP Each
Profiling Cutterhead Diameter: 160mm - 220mm
Cope/Profiling Spindle Diameter: 40mm
Cope/Profiling Spindle Speed: 6,800 RPM
Motorized/Programmable Open/Close
Dual Return Conveyor Belts
460v, 3ph
Year: 2005
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12547 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION
PARTE: 12547 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION
USADO - BUENAS CONDICIONESPrecision
58" Chipper - Model 58-60-166
Knife
150
HP Motor
AMXmachinery
PARTE: 2CA-RM150 - BASTONERA – CAPACIDAD 1” - 5” DIAMETRO
PARTE: 2CA-RM150 - BASTONERA -
CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board...
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...