Identificador: 2916
Abierta
.PNG)
.PNG)
Descripción
PARTE: 2PI-HP5D - ESPIGADORA HORIZONTAL
Is designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.
Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the center section of the inside edge of the door stile and the entire inside edge of the door rail material.
- Quick, accurate assembly of TFL doors.
- Elimination of complicated machine setup.
- Perform multiple machining operations on one machine reducing the amount of time the part is being transferred.
- Gain production times on CNC routers and Point to Points by shifting boring, doweling and grooving
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
-500x500.jpg)
AMXmachinery1
PARTE: 2CK-J168LH - CANTEADORA - 16" ANCHO
PARTE: 2CK-J168LH - CANTEADORA - 16" ANCHOIs a truly industrial long bed jointer capable of producing perfectly jointed material used in the production of wood furniture, doors, face frames. and more. The heavy-duty cast iron infeed & outfeed table and back fence provide superior vibration damping which results in an optimum jointed finish. The spiral insert cutterhead with its two-sided solid carbide inserts provides optimum stock removal with a superior finish. The insert knife cutterhe...
-500x500.png)
AMXmachinery1
MESA DE AIRE
PARTE: 2DO-TA-2 - MESA DE AIREIs designed for effortless handling of panels. Is typically
used to handle heavy loads without effort.Table dimensions: 3' x 5'9 self-releasing flotation outlets per square footEach outlet is self-locking by polyethylene ballsIncludes a built-in air flotation turbinePneumatic stroke up/down to lift panel to same working height than the edgebanderUp/Down stroke movement is triggered manually by operator on foot pedalPower and control components are installed into...
AMXmachinery1
SIERRA DE PENDULO
PARTE: 4ST-PS 50/O - SIERRA DE PENDULOWith head rotation is designed to offer versatility and functionality in cutting all different typesof packaging material.Thanks to a blade diameter 500 mm and a motor power of 5.5 kW allows you to cutup to 145 mm thick and 510 mm wide.Technical specifications Cutting unit Blade diameter500 mmBlade rotation speed2800 rpmBlade motor powerkW 5 (HP 7,5) trifaseWorking table height880 mmBlade feedingManualBlade rotation-45° 0° +60°Extraction outlets1 x Ø150...