ID: 3206
Open
Description
PARTE: 2EX-DB-50.3 - EXTRACTOR DE POLVOS - 5HP
Our dust blowers are made up of a heavy duty dynamically balanced vaneaxial fan
with safety guards on all inlets. The steel impeller is mounted directly to the shaft of
the stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phase
electric and have options for magnetic starters and remote control. Single phase
electric motors are available for blowers up to 7.5 horsepower.
Magnetic starter included.
See comparison chart below for specifications
|
|
|
10HP 3PH Dust Collection Blower |
15HP 3PH Dust Collection Blower, 7900CFM |
20HP 3PH Dust Blower |
25HP 3PH Dust Blower |
7.5HP 3PH Dust Blower |
|
Amps |
1PH: 27A @ 220V 3PH: 17A @ 220V |
27A @ 220V |
37A @ 220V |
49A @ 220V |
60A @ 220V |
1PH: 38A @ 220V 3PH: 20A @ 220V |
|
Cfm |
3200 |
6350 |
7900 |
8375 |
10350 |
4700 |
|
Fan rpm |
3450 |
3450 |
1725 |
1725 |
1725 |
3450 |
|
Fan size |
13" |
14" |
25" |
26" |
27" |
13.5" |
|
Horsepower |
5HP |
10HP |
15HP |
20HP |
25HP |
7.5HP |
|
Inlet-size |
10" |
12" |
14" |
16" |
18" |
12" |
|
Outlet size |
12" |
14" |
16" |
18" |
20" |
14" |
|
Phase |
1 or 3 |
3 |
3 |
3 |
3 |
1 or 3 |
|
Weight |
280 lbs |
360 lbs |
750 lbs |
810 lbs |
850 lbs |
330lbs |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA DE PANELES 1600MM
PARTE: 3HO-MJ6116 - SIERRA DE PANELES 1600MMThe sliding table saw for longitudinal, transverse and angular cutting of panel materials (MDF, fibreboard, chipboard and glued panels) faced and laminated, as well as blanks made of solid wood, with preliminary trimming of the lower edge to prevent chipping. It is possible to cut blanks individually or in batches, as well as to tilt the saw unit up to 45° in the vertical plane.Table Guide Length*Width1600mm * 375mmMax. Cutting Height at 90° 80mmM...
AMXmachinery1
ARMADORA DE PUERTAS
PARTE: 3HO-MH2324A B - ARMADORA DE PUERTASModel Choice Simplified(Single-Side): Compact footprint for workshops(Double-Side): Dual-station for high-volume output
-500x500.jpg)
AMXmachinery1
CEPILLO 2 CARAS - 30 PULGADAS
PARTE: 2CK-GT760ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...
-500x500.png)
AMXmachinery1
FRENO HIDRAULICO DE PLANO RECTO
FRENO HIDRAULICO DE PLANO RECTO PARTE: 2GM-HSB-1014Taiwan MachinesISO 9001 certifiedHydraulic adjustment for openingHydraulic power clamping for workpiece26” manual back gauge with handwheel1” manual beam adjustment ( front and back )Min. reverse bend is ¾” (20mm)Heavy welded all steel construction for maximum rigidityGermany Rexroth Hydraulic logic system centrally located and quietA wide guidebody ensures strong, stable, smooth & accurate movementComes wit...