ID: 79
Open
Description
PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257
Pinch Roller 62" capacity
Solid top and bottom rollers for flat panel laminating
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Work Height: 30-1/2”
(Optional Riser Available)
Drive Motor: ½ HP
Electrical: 120 V, 1 PH, 60 Hz (Options Available)
Air Requirement: 100 PSI
Crated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” high
Options:
Variable speed control 0-50, ½ HP DC motor #01667
Custom Riser Base
220 volt 1 phase 50hz
Up to 4” roll opening
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12670 – SIERRA DIMENSIONADORA CNC - CARGA FRONTAL - HOLZMA
PARTE: 12670 – SIERRA
DIMENSIONADORA CNC - CARGA FRONTAL - HOLZMA
Usada - Muy buenas Condiciones
Modelo: HPP350 38/38
Mfg: 2013
Electricos: 480 Voltage 60 Cycle 3 Phase
Cutting length; 3,800 mm (149")
Cutting width; 3,700 mm (145")
Main blade projection; 95 mm (3.7")
Saw carriage forward speed; 16 - 492 fpm
(programable)
Saw carriage reverse speed; 492 fpm
Scoring saw
3
hp
280 mm (11") max. blade
45
mm (1.8") center bor...
AMXmachinery
DESCORTEZADORA DE TRONCOS
PARTE # 11983 - DESCORTEZADORA DE TRONCOS - MORBARK 632USADAIncluye:2 transportadores con cadena arreadora de 40 pies c/u1 transportador de 10 pies con cadena1 torneadora que está incompleta
AMXmachinery
OPTICONTROL - PARA HERRAMIENTA POWERLOCK Y CONVENCIONAL - WEINIG
PARTE:
12393 - OPTICONTROL - PARA HERRAMIENTA POWERLOCK Y CONVENCIONAL - WEINIG
USADA – BUENAS CONDICIONESGREAT ADDITION FOR ANY WEINING MOULDER. MEASURES
TOOLING FOR BOTH POWERLOCK AND CONVENTIONL TOOLING. INCLUDES CARD FOR TOOL ROOMYear of Manufacture: 2006Condition: Very
GoodElectric: 110
Voltage 60 Cycle 1 PhaseModel: 970095Cutting
Circle Dia.: 0-300 mm, Tool Length: 0-310, Max. Measuring Width: 310 mm,
Non-Contact measuring of tool dimensions radius and height and their indi...
AMXmachinery
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
Nuevo con garantía
Temperatura Máxima: 926 grados centígrados
2400 watts, 20 Amps
Medidas interiores: 279 mm ancho x 279 mm fondo x 330 mm
alto You can make figurines up to 12” tall in the
F-130. Anneal large glass beads and marbles. Raise the spring-loaded
vertical-drop door to insert a glass figurine with a punty rod. Lower the door.
The punty rod will extend outside the firing chamber through the s...