Identificador: 2077
Abierta
Descripción
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS CONDICIONES
Manufactured in 2015
• 50.5 Total HP
• Spring loaded conveyor pin system
• Spiral insert knife cutterheads with
two sided solid carbide knives
• Digital electronic thickness
adjustment
• 25” Wide x 8” thick capacity
• Inverter variable feed speeds
• Sectional chip breaker and feed roller
before top head
• Removeable bottom head for knife change
• Chain feed drive
• Auto conveyor lubrication
• New replacement cost over $36,000.00
• Currently in storage, will load on truck
• Good condition, As taken from service
Maximum working width 25″
Maximum working thickness 8″
Minimum working thickness 0.315"
Minimum workpiece length 12.2″
Bottom head motor 20 HP
Top planing head motor 25 HP
Feed motor 5 HP
Table elevation motor 1/2 HP
Cutterhead diameter 4"
Knife dimensions 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
Cutterhead speed 5400 RPM
Feed speed (variable) 26-80
FPM Dust ports 2 @ 6”
Table dimensions 27" x 103" (32" from the floor)
Machine voltage
460/3/60 = 63 amps
230/3/60 = 125 amps
Prewired 460
Volt Machine dimensions (LxWxH) 105″ x 45.1″ x 67.7″
Net weight 6600 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
JUEGO DE 4 CUCHILLAS - PARA BASTONERA HAWKER
PARTE: 1HA-0001 - JUEGO DE 4 CUCHILLAS - PARA BASTONERA HAWKERPARA BASTONERA MODELO HAWKER 500, HAWKER 1500, HAWKER 2000, ETC.MEDIDAS: 6 MM ESPESOR X 55 MM ANCHO X 100 MM LARGO
AMXmachinery
2 SECANTES DE MADERA MORE
PARTE # 11871 – 2 SECANTES DE MADERA – CAPACIDAD 60,000 PT C/U – 2 CALDERAS 250 HP – MOREEn buenas condicionesCaldera para leñaSe vende todo junto o en partes
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC
PARTE: 12414 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59”
- FRIULMAC
USADA - BUENAS CONDICIONESFriulmac
AutomaticCut Off
MachineCutting
Length 6.29" - 59.05"Working
Width 1.18" - 5.51"Working
Thickness 0.47" - 1.37"Four 4HP
(3KW)Trim/Cut-off Motors 2 (2 each side)Saw
Blade Diameter 150mm Max X 30mm boreDust
Collection 4 X 120mm Outlets
New in
2019Video: https://www.youtube.com/watch?v=b5BPcY82hjs
AMXmachinery
CEPILLOS 1 CARA - CUCHILLAS PLANAS - USO RUDO INDUSTRIAL
PARTE: 5NE-CP1-016 - CEPILLO 1 CARA - CUCHILLAS PLANAS - 16" ANCHO - MOTOR 5 HPPARTE: 5NE-CP1-020 - CEPILLO 1 CARA - CUCHILLAS PLANAS - 20” ANCHO - MOTOR 7.5 HPPARTE: 5NE-CP1-024 - CEPILLO 1 CARA - CUCHILLAS PLANAS - 24” ANCHO - MOTOR 10 HPNUEVOS CON GARANTIACEPILLOS PARA USO PESADO INDUSTRIALCARACTERISTICASCEPILLO 14”CEPILLO 16”CEPILLO 20”CEPILLO 24”CAPACIDAD ANCHO14”16”20”24”CAPACIDAD ALTURA6”6”6”6”MOTOR PRINCIPAL5 HP5 HP7.5 HP10 HPMOTOR ALIMENTADOR1 HP1 HP2 HP2 H...