Identificador: 148
Abierta
.jpg)
Descripción
PARTE # 2TA-WS-DA3760 - LIJADORA - CALIBRADORA - 37" ANCHO
Cabezales: 2 cabezas
Capacidad: 37" ancho x 60" largo
- With the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.
- Rugged heavy-duty sheet metal construction designed for durability usage.
- Full power industrial motors drive sanding and auto infeed smoothly.
- Infeed and outfeed are spring loaded hold down rollers to ensure positive feeding without sanding mark.
- Combination platen & drum sanding head for best sanding choice such as
- 1. With the platen up, the sander functions as a drum only machine, for sanding with a 40 ~ 100 grit belt.
- 2. With the platen and drum same level, intermediate and final finishing is possible, using a grit of 120 ~ 180.
- 3. With the platen down (below drum), used for the fine finishing or lacquer sealer sanding, with 180 ~ 600 grit.
- Sanding platen with a quick release and lock down designed for easy removal or loading of graphite platen.
- Computerized thickness adjustments control with accurate digital read out, just key in the size you are desired and automatic table movement for sanding thickness within 0.005? accuracy.
- Large size diameter contact drum is dynamically balanced rubber covered spiral grooves, design to provide considerable advantages for the effective removal of material.
- Special rubber feed belt for safe non-slipping, transporting the work pieces.
- The abrasive belts are tracked by oscillating cylinders linked to the upper roller. The edge of the belt is detected by electric eye sensor, which in turn control the air supply to the position via solenoid value. Also one limit switch it?s located on each and end top roller of the sander paper for quick stop in case of the event of belt breakage.
- Main table designed with the convenient leveling adjustment which assures greater stability with excellent tolerance they provide variable from 0? ~ 5? range sanding thickness.
- 4 Heavy-duty jackscrews powered conveyor table elevation.
Opcionales:
- Cilindro Acerado
- Patin Neumatico
OTROS MODELOS Y CARACTERISTICAS:
| SPECIFICATION | ||||
| Max. Working Width | ||||
| Max. Working Thickness | ||||
| Min. Working Length | ||||
| Sanding Belt Dimensions (W x L) | ||||
| Dust Collection Hood (Dia x Holes) | 8" x 2 | |||
| Main Motor | ||||
| Feed Motor | ||||
| Table Raising / Lowering Motor | ||||
| Var. Feed Speed (FPM) | ||||
| Working Air Pressure | ||||
| Exhaust Volume Require | ||||
| N.W. | ||||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2NT-DC15SS – COLECTOR ASERRIN - 15 HP – 5000 CFM
PARTE: 2NT-DC15SS – COLECTOR ASERRIN - 15 HP – 5000 CFMNUEVO CON GARANTIABlower HP: 15HP Direct DriveShaker HP: 1/2HP3 phase, 460V26-3/8" 8-Blade ImpellerMachine CFM Rating: 5000Inlet Dust Port Size: 16" RoundOutlet Dust Port Size: 12"x15"Filters: Seventy-Two 5"x60 Clothe BagsBottom Bags: 22"x48"
AMXmachinery
SIERRA ESCUADRADORA SCM MINIMAX S315WS
PARTE # AMX-10054 - SIERRA ESCUADRADORA – SCM - MINIMAX S315WSEN MUY BUENAS CONDICIONESLA MAQUINA ESTA COMPLETA Y YA DESARMADA LISTA PARA ENVIO EN SU TARIMA DE MADERAMOTOR: 5 HP, 230V, 60HZDISCO PRINCIPAL: DIAMETRO 12” (315 MM MAX) FLECHA 30 MM, 4200 RPM - INSTALADODISCO INCISOR: DIAMETRO 4-3/4” (120MM), Z 20, FLECHA 20 MM, 9300 RPM - INSTALADOLARGO CARRO: 3200 mm (126”)LARGO AGARRADERA DEL CARRO: 360 mm (14”)LARGO CARRO TOTAL: 3560 mm (140”)MODELO: 2005HECHA EN ITALIAPESO MAQUINA: 5...
AMXmachinery
COMPRESOR DE AIRE LUBRICADO - TANQUE 24 LT, 2-1/2 HP, 127 V, 1 FASE
PARTE: 2SL-DC-25H24L - COMPRESOR DE AIRE LUBRICADO - TANQUE
24 LT, 2-1/2 HP, 127 V, 1 FASE
Nuevo con garantía
Potencia 2 1/2 HP
Tanque de 24L
Uso General
115 PSI de presión
Válvula reguladora de presión
2 salidas de aire con conectores rápidos
-500x500.jpg)
AMXmachinery
PART: 1AM-1180-E – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY
PART: 1AM-1180-E – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTYNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220V
Maximum notcher size 9” length x 3” height x 3” depth400 to 800 notcher/hr. approximateCutterhead with insert replaceable tip knives cutters for new and recycled wood installedVideo: https://vimeo.com/533846659Optional: Motor 10 HP, 220V, 1 phaseFor more...