ID: 148
Open
.jpg)
Description
PARTE # 2TA-WS-DA3760 - LIJADORA - CALIBRADORA - 37" ANCHO
Cabezales: 2 cabezas
Capacidad: 37" ancho x 60" largo
- With the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.
- Rugged heavy-duty sheet metal construction designed for durability usage.
- Full power industrial motors drive sanding and auto infeed smoothly.
- Infeed and outfeed are spring loaded hold down rollers to ensure positive feeding without sanding mark.
- Combination platen & drum sanding head for best sanding choice such as
- 1. With the platen up, the sander functions as a drum only machine, for sanding with a 40 ~ 100 grit belt.
- 2. With the platen and drum same level, intermediate and final finishing is possible, using a grit of 120 ~ 180.
- 3. With the platen down (below drum), used for the fine finishing or lacquer sealer sanding, with 180 ~ 600 grit.
- Sanding platen with a quick release and lock down designed for easy removal or loading of graphite platen.
- Computerized thickness adjustments control with accurate digital read out, just key in the size you are desired and automatic table movement for sanding thickness within 0.005? accuracy.
- Large size diameter contact drum is dynamically balanced rubber covered spiral grooves, design to provide considerable advantages for the effective removal of material.
- Special rubber feed belt for safe non-slipping, transporting the work pieces.
- The abrasive belts are tracked by oscillating cylinders linked to the upper roller. The edge of the belt is detected by electric eye sensor, which in turn control the air supply to the position via solenoid value. Also one limit switch it?s located on each and end top roller of the sander paper for quick stop in case of the event of belt breakage.
- Main table designed with the convenient leveling adjustment which assures greater stability with excellent tolerance they provide variable from 0? ~ 5? range sanding thickness.
- 4 Heavy-duty jackscrews powered conveyor table elevation.
Opcionales:
- Cilindro Acerado
- Patin Neumatico
OTROS MODELOS Y CARACTERISTICAS:
| SPECIFICATION | ||||
| Max. Working Width | ||||
| Max. Working Thickness | ||||
| Min. Working Length | ||||
| Sanding Belt Dimensions (W x L) | ||||
| Dust Collection Hood (Dia x Holes) | 8" x 2 | |||
| Main Motor | ||||
| Feed Motor | ||||
| Table Raising / Lowering Motor | ||||
| Var. Feed Speed (FPM) | ||||
| Working Air Pressure | ||||
| Exhaust Volume Require | ||||
| N.W. | ||||
| G.W. |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12656 - SIERRA MULTIPLE - TRIM SAW - NEWMAN KM16
PARTE:
12656 - SIERRA MULTIPLE - TRIM SAW - NEWMAN KM16
USADA - BUENAS CONDICIONES
Comes with 2 package infeed
decks
1-unassembled and needs TLC
1-10' wide
AMXmachinery
ENCHAPADORA CURVOS
PARTE # 12C-EB-1 - ENCHAPADORA CANTOS CURVOSPOTENCIA MAXIMA: 3500 WATTSVOLTAJE: 220 VOLTSVELOCIDAD DE TRABAJO: 4 METROS X MINUTOTEMPERATURA DE OPERACIÓN: 150-230 ºCALIMENTADOR: RODILLO DE HULEPROTECCIÓN: BAQUELITAMESA: PLACA 3/16ADHESIVO: HOT MEALPESO APROXIMADO: 180KGPARO DE EMERGENCIA2 ZONAS DE CONTROL DE TEMPERATURAPIRÓMETROS ANALOGOBASTIDOR: PLACA CA 10TRANSMICION: ENGRANESTERMOSTATOCONTROL DE ARRANQUETERNOPAR: TIPO J
AMXmachinery
PARTE: 12422 - PRENSA DE ENSAMBLE FINGER JOINT
PARTE:
12422 - PRENSA DE ENSAMBLE FINGER JOINT
USADA
- BUENAS CONDICIONESMarca
WeiliModelo
MHZ 1550ªPrensa
para ensamble de piezas largas Finger JointLas
piezas se introducen ya encoladas
Largo
útil de ensamble desde 50 cm hasta 5 mt
AMXmachinery
ROUTER CNC - MODEL R - 15" X 20"
PARTE: 2TA-R-1520 – ROUTER CNC – MESA 15”X 20”3 Axis table top machine easily to do cutting, engraving, routing and etching for signs, sample or small production at the material such as wood, plastic, acrylic, plexi-glass, corian....User friendly iPicture software transfers the images, picture file to 3D cutting program with in a second at superior performance.Optional CAD/CAM system can create and edit part programs then send to machine for cutting. DXF files can be imported, modified a...